Review of the Use of Sustainable Materials in the Production of Building Units
DOI:
https://doi.org/10.31272/jeasd.28.4.14الكلمات المفتاحية:
Building unit ، Cracks، Compressive strength، Sustainable Waste materialالملخص
The main goal of the technology is the minimizing of the huge consumption of energy specifically that arises because of burning clay bricks inside furnaces. An overall review of the available literature to determine the present knowledge and thinking level in unfired/fired clay bricks, and to establish an appropriate research context. Sustainable development has become the conversation of the age, and on this basis, searching for environmentally friendly materials has become a major element in this dialog. In this research, materials were prepared and ground to be downy with cement-like properties, and cement was the binding material in all mixtures. The results gained from the scrutiny showed that toting the reused material increases the compressive strength, with the highest compressive strength (33.8 MPa and the lowest being 1.9 MPa). Or shrink the difference in the impact factor and then conserve the environment from these materials and harness them for reuse in environmental resources.
المراجع
Oti, J. E., Kinuthia, J. M., & Robinson, R. B. (2014), "The development of unfired clay building material using Brick Dust Waste and Mercia mudstone clay," Applied Clay Science, 102, 148–154. https://doi.org/10.1016/j.clay.2014.09.031
Sahu, M. K., Lokesh, S., and Suchi N., C., (2016), "Critical Review on Fly Ash Bricks," International Journal of Advance Engineering and Research Development, 4(03). https://doi.org/10.21090/ijaerd.isnci05
Baronio, G., Binda, L., Tedeschi, C., & Tiraboschi, C. (2003), " Characterisation of the materials used in the construction of the Noto Cathedral, "Construction and Building Materials, 17(8), 557–571. https://doi.org/10.1016/j.conbuildmat.2003.08.007
Pearson G.T., Conservation of Clay and Chalk Buildings, 1st ed.: Routledge, U.S.,1992.
Walker, P., & Maniatidis, V. (2004), "Briefing: Rammed earth: a natural option for walling," Proceedings of the Institution of Civil Engineers - Civil Engineering, 157(1), 5–5. https://doi.org/10.1680/cien.2004.157.1.5
Kinuthia, J. M. (2020), "Unfired clay materials and construction," Nonconventional and Vernacular Construction Materials, 351–373. https://doi.org/10.1016/b978-0-08-102704-2.00013-5
Morel, J.-C., Charef, R., Hamard, E., Fabbri, A., Beckett, C., & Bui, Q.-B. (2021), "Earth as construction material in the circular economy context: practitioner perspectives on barriers to overcome," Philosophical Transactions of the Royal Society B: Biological Sciences, 376(1834), 20200182. https://doi.org/10.1098/rstb.2020.0182
Gencel, O. (2015), "Characteristics of fired clay bricks with pumice additive," Energy and Buildings, 102, 217–224. https://doi.org/10.1016/j.enbuild.2015.05.031
Azhar Saleem, M., Minhaj Saleem Kazmi, S., & Abbas, S. (2017), "Clay bricks prepared with sugarcane bagasse and rice husk ash – A sustainable solution," MATEC Web of Conferences, 120, 03001. https://doi.org/10.1051/matecconf/201712003001
Munir, M. J., Abbas, S., Nehdi, M. L., Kazmi, S. M. S., & Khitab, A. (2018), "Development of Eco-Friendly Fired Clay Bricks Incorporating Recycled Marble Powder," Journal of Materials in Civil Engineering, 30(5). https://doi.org/10.1061/(ASCE)mt.1943-5533.0002259
Gencel, O., Erdugmus, E., Sutcu, M., & Oren, O. H. (2020), "Effects of concrete waste on characteristics of structural fired clay bricks," Construction and Building Materials, 255, 119362. https://doi.org/10.1016/j.conbuildmat.2020.119362
Loryuenyong, V., Panyachai, T., Kaewsimork, K., & Siritai, C. (2009), " Effects of recycled glass substitution on the physical and mechanical properties of clay bricks," Waste Management, 29(10), 2717–2721. https://doi.org/10.1016/j.wasman.2009.05.015
Hassan, K. M., Fukushi, K., Turikuzzaman, K., & Moniruzzaman, S. M. (2014), "Effects of using arsenic–iron sludge wastes in brick making," Waste Management, 34(6), 1072–1078. https://doi.org/10.1016/j.wasman.2013.09.022
Chidiac, S. E., & Federico, L. M. (2007), "Effects of waste glass additions on the properties and durability of fired clay brick," This article is one of a selection of papers published in this Special Issue on Masonry. Canadian Journal of Civil Engineering, 34(11), 1458–1466. https://doi.org/10.1139/l07-120
Cusidó, J. A., & Cremades, L. V. (2012), "Environmental effects of using clay bricks produced with sewage sludge: Leachability and toxicity studies," Waste Management, 32(6), 1202–1208. https://doi.org/10.1016/j.wasman.2011.12.024
Rezaie, A., Godio, M., & Beyer, K. (2020), "Experimental investigation of strength, stiffness and drift capacity of rubble stone masonry walls," Construction and Building Materials, 251, 118972. https://doi.org/10.1016/j.conbuildmat.2020.118972
Kazmi, S. M. S., Abbas, S., Munir, M. J., & Khitab, A. (2016), "Exploratory study on the effect of waste rice husk and sugarcane bagasse ashes in burnt clay bricks," Journal of Building Engineering, 7, 372–378. https://doi.org/10.1016/j.jobe.2016.08.001
Gencel, O., Kazmi, S. M. S., Munir, M. J., Sutcu, M., Erdogmus, E., & Yaras, A. (2021), "Feasibility of using clay-free bricks manufactured from water treatment sludge, glass, and marble wastes: An exploratory study," Construction and Building Materials, 298, 123843. https://doi.org/10.1016/j.conbuildmat.2021.123843
Muñoz, P., Letelier, V., Zamora, D., & Morales, M. P. (2020), "Feasibility of using paper pulp residues into fired clay bricks," Journal of Cleaner Production, 262, 121464. https://doi.org/10.1016/j.jclepro.2020.121464
Dawood, A. O., Mussa, F. I., Khazraji, H. A., Ulsada, H. A. A., & Yasser, M. M. (2021), "Investigation of Compressive Strength of Straw Reinforced Unfired Clay Bricks For Sustainable Building Construction," Civil and Environmental Engineering, 17(1), 150–163. https://doi.org/10.2478/cee-2021-0016
Khitab, A., Riaz, M. S., Jalil, A., Khan, R. B. N., Anwar, W., Khan, R. A., Arshad, M. T., Kirgiz, M. S., Tariq, Z., & Tayyab, S. (2021), "Manufacturing of Clayey Bricks by Synergistic Use of Waste Brick and Ceramic Powders as Partial Replacement of Clay," Sustainability, 13(18), 10214. https://doi.org/10.3390/su131810214
Kazmi, S. M. S., Abbas, S., Saleem, M. A., Munir, M. J., & Khitab, A. (2016), "Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashes," Construction and Building Materials, 120, 29–41. https://doi.org/10.1016/j.conbuildmat.2016.05.084
Ferreira Pinto, A. P., Sena da Fonseca, B., & Vaz Silva, D. (2021), "Mechanical characterization of historical rubble stone masonry and its correlation with the masonry quality assessment," Construction and Building Materials, 281, 122168. https://doi.org/10.1016/j.conbuildmat.2020.122168.
Conover, D., & Ferreira, S. (2019), "Codes and Standards Update January 2019," https://doi.org/10.2172/1761940
Ukwatta, A., Mohajerani, A., Setunge, S., & Eshtiaghi, N. (2015), "Possible use of biosolids in fired-clay bricks," Construction and Building Materials, 91, 86–93. https://doi.org/10.1016/j.conbuildmat.2015.05.033
Chen, Y., Zhang, Y., Chen, T., Zhao, Y., & Bao, S. (2011), "Preparation of eco-friendly construction bricks from hematite tailings," Construction and Building Materials, 25(4), 2107–2111. https://doi.org/10.1016/j.conbuildmat.2010.11.025
Ministry of Public Security, Ministry of Railways, Ministry of Communications; Ministry of Health, General Administration of Quality Supervision, Inspection, and Quarantine, General Administration of Civil Aviation of China, and General Administration of Customs: Urgent Notice Concerning the Strengthening of Health Quarantine Prevention and Controls over the Spread of Atypical Pneumonia (April 30, 2003). (2006). Chinese Law & Government, 39(3), 38–40. https://doi.org/10.2753/clg0009-4609390303
Maximino C. Ongpeng, J., Inciong, E., Sendo, V., Soliman, C., & Siggaoat, A. (2020), "Using Waste in Producing Bio-Composite Mycelium Bricks," Applied Sciences, 10(15), 5303. https://doi.org/10.3390/app10155303
Gencel, O., Sutcu, M., Erdogmus, E., Koc, V., Cay, V. V., & Gok, M. S. (2013), "Properties of bricks with waste ferrochromium slag and zeolite," Journal of Cleaner Production, 59, 111–119. https://doi.org/10.1016/j.jclepro.2013.06.055
Sutcu, M., Erdogmus, E., Gencel, O., Gholampour, A., Atan, E., & Ozbakkaloglu, T. (2019), "Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production," Journal of Cleaner Production, 233, 753–764. https://doi.org/10.1016/j.jclepro.2019.06.017
Sabr, Y.N.; Jarallah H.K. & Abdulkareem, H.I. (2019), "Improving Shear Strength of Thick Hollow Core Slabs by using Lightweight High Strength Concrete Produced from Recycled Crushed Clay Brick and Iron Powder Waste," Journal of Engineering and Sustainable Development. 23 (6),128-146. https://doi.org/10.31272/jeasd.23.6.10.
Jarallah H.K.; Paul D. K. & Singh Y. (2020), " Seismic evaluation and retrofit on an existing hospital building," Journal of Engineering and Sustainable Development. 24 (6),1-21. https://doi.org/10.31272/jeasd.24.6
Saleem M.A.; Kazmi S. M. & Abbas S. (2017), " Clay bricks prepared with sugarcane bagasse and rice husk ash – A sustainable solution," MATEC Web of Conferences. 120,10. doi: https://doi.org/10.1051/matecconf/201712003001.
Morel, J. C.; Charef, R., Hamard, E., Fabbri, A., Beckett, C., & Bui, Q. B. (2021), " Earth as construction material in the circular economy context: practitioner perspectives on barriers to overcome," Philosophical Transactions of the Royal Society B, 376(1834), 20200182. doi: https://doi.org/10.1098/rstb.2020.0182.
Khitab, A., Riaz, M. S., Jalil, A., Khan, R. B. N., Anwar, W., Khan, R. A., and Tayyab, S. (2021)," Manufacturing of clayey bricks by synergistic use of waste brick and ceramic powders as partial replacement of clay," Sustainability, 13(18), 10214. https://doi.org/10.3390/su131810214.
Munir, M. J., Kazmi, S. M. S., Gencel, O., Ahmad, M. R., & Chen, B. (2021), "Synergistic effect of rice husk, glass, and marble sludges on the engineering characteristics of eco-friendly bricks," Journal of Building Engineering, 42, 102484, https://doi.org/10.1016/j.jobe.2021.102484.
Grammatikakis, E., Kyriakidis, D.Demadis, Cabeza Diaz. &Leon-Reina., (2019), "Mineralogical characterization and firing temperature delineation on Minoan pottery, focusing on the application of micro-Raman spectroscopy, " Heritage,2,3, 2652–2664.doi: https://doi.org/10.3390/heritage2030163.
Obianyo, I.I., Onwualu, A.P. & Soboyejo, A.B.O. (2020), "Mechanical behaviour of lateritic soil stabilized with bone ash and hydrated lime for sustainable building applications,” Case Studies in Construction Materials,12, . https://doi.org/10.1016/j.cscm.2020.e00331.
Hasan, M.R.; Siddika, A.; Akanda, M.P.A. & Islam, M.R. (2021), "Effects of waste glass addition on the physical and mechanical properties of brick,” Innovative Infrastructure Solutions, 6, 36. . https://doi.org/10.1007/s41062-020-00401-z.
Jiménez-Quero, V.G.; Guerrero-Paz, J. & Ortiz-Guzmán, M. (2021), "Alternatives for improving the compressive strength of clay-based bricks,” Journal of Physics Conference Series, 1723, 012027. . https://doi.org/10.1088/1742-6596/1723/1/012027.
Akinyele, J.O.; Igba, U.T.; Ayorinde, T.O. & Jimoh, P.O. (2020), "Structural efficiency of burnt clay bricks containing waste crushed glass and polypropylene granules,” Case Studies in Construction Materials, 13. . https://doi.org/10.1016/j.cscm.2020.e00404.
Tripathi, M., Chauhan, V.B. (2021), "Evaluation of waste glass powder to replace the clay in fired brick manufacturing as a construction material, " Innovative Infrastructure Solutions, 6:1–16. https:// doi. org/ 10. 1007/s41062- 021- 00492-2.
Kazmi S.M.S., Munir M.J. & Wu YF et al (2018), "Thermal performance evaluation of eco-friendly bricks incorporating waste glass sludge,” Journal of Cleaner Production, 172:1867–1880. https://doi. org/ 10. 1016/j. jclep ro.2017. 11. 255.
ASTM C67, C67M-21 (2021), "Standard test methods for sampling and testing brick and structural clay tile, " ASTM Int West Conshohocken, PA 1–12. https://doi. org/ 10. 1520/ C0067.
Nurain Izzati M.Y., Suraya Hani A., Shahiron S, et al (2019), "Strength and water absorption properties of lightweight concrete brick," IOP Conference Series Materials Science and Engineering, 513. https:// doi. org/ 10. 1088/ 1757- 899X/513/1/ 012005.
Ahmad A., Adil M., Khalil A. & Rahman M. (2021), "Mechanical properties and durability of boardcrete blocks prepared from recycled cardboard," Journal of Building Engineering, 33:101644. https:// doi. org/ 10. 1016/j. jobe.2020. 101644.
Al-Khazraji, H., Zemam, S.K., Mohsin, R.D., Majeed, T.H., & Abboo, A.H. (2022), "Utilization of limestone to effect on physical-mechanical properties of fired clay brick, " Civil and Environmental Engineering, Vol. 18, Issue 2, 750-759, . https://doi.org/10.2478/cee-2022-0069.
Hilal, N. N., Mohammed, A. S. & Ali, T. K. M. (2022), "Properties of eco-friendly concrete contained limestone and ceramic tiles waste exposed to high temperature, " Arabian Journal for Science and Engineering, Vol. 45, Iss. 5, pp. 4387-4404. . https://doi.org/10.1007/s13369-020-04482-x.
Du, Y. - Yang, W., Ge, Y. - Wang, S. - Liu, P.(2021), "Thermal conductivity of cement paste containing waste glass powder, metakaolin, and limestone filler as supplementary cementitious material, " Journal of Cleaner Production, Vol. 287, 11 p. . https://doi.org/10.1016/j.jclepro.2020.125018.
Chouhan, H. S., Kalla, P., Nagar, R. & Gautam, P. K (2019), "Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixes, " Construction and Building Materials, Vol. 221, 2019, pp. 363-374. https://doi.org/10.1016/j.conbuildmat.2019.06.097.
Chouhan, H. S., Kalla, P., Nagar, R., Gautam, P. K. & Arora, A. N.(2020), "Investigating use of dimensional limestone slurry waste as fine aggregate in mortar. Environment, " Development and Sustainability, Vol. 22, Iss. 3, pp. 2223-2245. https://doi.org/10.1007/s10668-018-0286-9.
Choudhary, J., Kumar, B., Gupta, A.(2020), "Feasible utilization of waste limestone sludge as filler in bituminous concrete, " Construction and Building Materials, Vol. 239, 13 p. . https://doi.org/10.1016/j.conbuildmat.2019.117781
Barros, M. M., DE Oliveira, M. F. L., DA Conceicao Ribeiro, R. C., Bastos, D. C. & DE Oliveira, M. G. (2020), "Ecological bricks from dimension stone waste and polyester resin, " Construction and Building Materials, Vol. 232, 9 p. https://doi.org/10.1016/j.conbuildmat.2019.117252.
Dawood, A. O., Mussa, F. I., AL Khazraji, H., ABD Ulsada, H. A. & Yasser, M. M.(2021), "Investigation of compressive strength of straw reinforced unfired clay bricks for sustainable building construction, " Civil and Environmental Engineering, Vol. 17, Iss. 1, pp. 150-163. . https://doi.org/10.2478/cee-2021-0016.
Thalmaier, G., Cobirzan, N., Balog, A. A., Constantinescu, H. & Ceclan, A., Voinea, M. & Marinca, T. F.(2022), "Assessment of limestone waste addition for fired clay bricks, " Materials, Vol. 15, Iss. 12, 12 p, https://doi.org/10.3390/ma15124263.
Chouhan, H.S.; Kalla, P.; Nagar, R.; Gautam, P.K.& Arora, A.N. (2020), "Investigating use of dimensional limestone slurry waste as fine aggregate in mortar," Environ. Dev. Sustain., 22, 2223–2245. https://doi.org/10.1007/s10668-018-0286-9.
Do˘gan-Sa˘glamtimur, N.; Bilgil, A.; Szechy´nska-Hebda, M.; Parzych, S. & Hebda, M.(2021), "Eco-Friendly fired brick produced from industrial ash and natural clay: a study of waste reuse," Materials, 14, 877. . https://doi.org/10.3390/ma14040877
Thalmaier, G.; Cobîrzan, N.; Balog, A. A.; Constantinescu, H.; Streza, M.; Nasui, M.&Neamtu, B.V. (2020), "Influence of sawdust particle size on fired clay brick properties, " Materiales de Construcción, 70, e215. https://doi.org/10.3390/designs5030057. doi:10.3989/mc.2020.04219.
Cobîrzan, N.; Thalmaier, G.; Balog, A.A.; Constantinescu, H.; Ceclan, A.& Nasui, M. (2021), "Volcanic tuff as secondary raw material in the production of clay bricks, "Materials, 14, 6872. https://doi.org/10.3390/ma14226872.
Ullah, S.M.; Hasan, M.; Ahmad, S.I.; Ahmed, T. (2020), "Performance of industrial sludge-amended bricks manufactured in conventional kilns," J. Mater. Cycles Waste Manag., 22, 1932–1942. https://doi.org/10.1007/s10163-020-01080-9.
Sufian, M.; Ullah, S.; Ostrowski, K.A.; Ahmad, A.; Zia, A.; Sliwa-Wieczorek, K.; Siddiq, M.& Awan, A.A.(2021), "An Experimental and empirical study on the use of waste marble powder in construction material, " Materials, 14, 3829. https://doi.org/10.3390/ma14143829.
Singh, A. & Chandel, M.K. (2022), "Valorization of fine fraction from legacy waste as fired bricks: A step towards circular economy, " Journal of Cleaner Production, 331, 129918. https://doi.org/10.1016/j.jclepro.2021.129918.
التنزيلات
Key Dates
الإستلام
النسخة النهائية
الموافقة
النشر الالكتروني
منشور
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2024 Rua Abd Kudhaer, Mohammed M. Salman, Husain K. Jarallah (Author)
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
