PRODUCTION OF DUCTILE CAST IRON BY RECYCLING GRAY CAST IRON SCRAP WITH ADDING VARIOUS LOCAL MATERIALS

Authors

  • Ali A. Mnati Material Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq Author
  • Kadhim K. Resan Material Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq Author

DOI:

https://doi.org/10.31272/jeasd.27.1.10

Keywords:

Scrap, recycling pearlite, nodular cast iron, microstructure, strength

Abstract

Ductile cast iron is also called spheroidal graphite cast iron or nodular cast iron. It contains graphite in the semblance of nodules. Automobile scrap (i.e., the engine block) made from gray cast iron was used in this study. In this paper, the recycling of gray cast iron to ductile iron, and its influence on the microstructure and mechanical characteristics be studied. Four kilograms of scrap were put in a crucible and then heated up to 1400°C in an oil-fired crucible furnace. For desulfurization, 4% burnt lime with 0.5% fluorspar was direct tapped into the melt at 1400°C. Then, the additions were 3.5% nickel, 0.75% Ferro molybdenum, and 0.5% Ferro manganese of the scrap weighing. Also, 3.75% nodularizing alloy and 1% inoculating alloy of scrap weight were to treat the molten at 1450°C. Samples analyses have been achieved to determine their composition, tensile strength, impact strength, Brinell hardness, and microstructural. The microstructures revealed that the scrap sample possesses flake graphite, and the produced sample includes nodule graphite. It is observed that the ultimate tensile stress, elongation, and hardness of the scrap sample, which are 247.75 MPa, 6%, and 400.3 HB, respectively, increased in the product sample to 416.23 MPa, 8%, and 451 HB, respectively.

References

Graedel, T. E., Allwood, J., Birat, J. P., Buchert, M., Hagelüken, C., Reck, B. K., Sibley, S. F., & Sonnemann, G. (2011). "What do we know about metal recycling rates?" Journal of Industrial Ecology, 15(3), 355–366.

Jia-xin Bai. (2019)."Selection of Raw Materials and control of trace elements for production of high-quality SG iron" (Vol. 16).

Omole, S. O., Oyetunji, A., Alaneme, K. K., & Peter A. Olubambi. (2018)." Structural characterization and mechanical properties of pearlite – Enhanced micro-alloyed ductile irons". Journal of King Saud University – Engineering Sciences.

Omole, S., & A. Oyetunji. (2014). "Achievement of Nodules in Ductile Iron Having Sulphur Content Not Less Than 0.07% Weight". ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 1584‐2673.

Syed Shah Abdul Mogni.)1992). "Production of ductile iron castings".Bangladesh University of Engineering and Technology]. In Litejnoe Proizvodstvo (Issue 5).

Fatahalla, N., Abuelezz, A., & Semeida, M. (2009)." C, Si and Ni as alloying elements to vary carbon equivalent of austenitic ductile cast iron: Microstructure and mechanical properties". In Materials Science and Engineering A (Vol. 504, Issues 1–2, pp. 81–89).

Peter Beeley. (2001)." FoundryTechnology". In Ullmann’s Encyclopedia of Industrial Chemistry (Second edi).

ASTM E8. (2013)."ASTM standard E8/E8M–13 ". In Standard Test Methods for Tension Testing of Metallic Materials, (Issue C, pp. 1–27).

Abdulrazaq, O. A., Nassr, Kadhim, Z. D., & Subhi, A. D. (2009). "An Investigation into the Railway Shoulder Manufacturing". Journal of Engineering and Development, Vol. 13, N(1813–7822).

Tanzim Nasir. (2011)." Design of Heat Treatment for Production of Austemper Austempered Ductile with Targeted

Automotive Applications". university of windsor.

ASM Metals Handbook. (1972). "Atlas of Microstructures of Industrial Alloys". In Taylor Lyman (Ed.), Metals Handbook (8th Editio, p. 351).

Olawale, J. O., Ibitoye, S. A., & Oluwasegun, K. M. (2016)." Processing Techniques and Productions of Ductile Iron: A Review". In International Journal of Scientific & Engineering Research (Vol. 7, Issue 9).

Konca, E., Tur, K., & Koç, E. (2017). "Effects of alloying elements (Mo, Ni, and Cu) on the austemperability of GGG-60 ductile cast Iron". In Metals (Vol. 7, Issue 8).

Fundidos, A. E. de ferros. (1999)."Standard Specification for Ductile Iron". In ASTM Standard Specification for Ductile Iron(section XII).

Downloads

Key Dates

Published

2023-01-01

How to Cite

A. Mnati, A. ., & K. Resan , K. (2023). PRODUCTION OF DUCTILE CAST IRON BY RECYCLING GRAY CAST IRON SCRAP WITH ADDING VARIOUS LOCAL MATERIALS. Journal of Engineering and Sustainable Development, 27(1), 117-126. https://doi.org/10.31272/jeasd.27.1.10

Similar Articles

1-10 of 384

You may also start an advanced similarity search for this article.