Studying the Hygrothermal Effects on the Impact Responses of Composite Materials Under Various Environmental Conditions
DOI:
https://doi.org/10.31272/jeasd.28.5.14Keywords:
Impact, Composite material , Hygro-thermal, NanocompositesAbstract
The current study focuses on the effects of different weather conditions, including temperature and humidity, on the impact energy properties of composite materials tested using a Charpy impact tester connected to a special hygro-thermal device. This is a unique device, handcrafted and equipped with sensors and control panels The composite materials, used in this study, combine polyester and reinforced with fiberglass in various shapes and loadings. Nanopowder materials including titanium oxide nanoparticles (TiO2) and aluminum oxide nanoparticles (Al2O3) were also added to the composite materials and their effects were assessed. The obtained results showed that all the different factors studied in this research have a positive effect on the impact test, except the nanomaterials in both cases (Al2O3 and TiO2 nanopowders) at 2 wt.% of the sample and at approximately 10 wt.%. Hence, at this percentage, there is not enough effect on the impact energy
References
S. G.Lee and P. Zahuta, “Instrumented Impact and Static Indentation of Composites,” Journal of Composite Materials, vol. 25, no. 2, pp. 204–222, Feb. 1991, doi: https://doi.org/10.1177/002199839102500205.
R. H. Hilal, “The Effect of Bentonite (BNTN) Nanoclays with Multiple Weight Proportions on the Mechanical Properties of Polyacrylamide (PAM) Composites,” Al-Nahrain Journal for Engineering Sciences, vol. 25, no. 1, pp. 1–5, Apr. 2022, doi: https://doi.org/10.29194/njes.25010001.
B. N. Leis, “The Charpy Impact Test and Its Applications,” Journal of Pipeline Engineering, vol. 12, no. 3, p. 183, 2013, Accessed: 2023. [Online]. Available: https://openurl.ebsco.com/EPDB%3Agcd%3A5%3A15779957/detailv2?sid=ebsco%3Aplink%3Ascholar&id=ebsco%3Agcd%3A91358461&crl=c
S. K. Aljashaami and M. A. Mohammed, “Nano Materials As A Mechanism For Achieving Contextualism In Architecture,” Kufa Journal of Engineering, vol. 15, no. 3, pp. 32–46, Aug. 2024, doi: https://doi.org/10.30572/2018/kje/150303.
I. R. Agool, K. J. Kadhim, and A. Hashim, “Fabrication of New nanocomposites: (PVA-PEG-PVP) blend-zirconium Oxide nanoparticles) for Humidity Sensors,” International Journal of Plastics Technology, vol. 21, no. 2, pp. 397–403, Oct. 2017, doi: https://doi.org/10.1007/s12588-017-9192-5.
I. R. Agool, K. J. Kadhim, and A. Hashim, “Synthesis of (PVA–PEG–PVP–ZrO2) Nanocomposites for Energy Release and Gamma Shielding Applications,” International Journal of Plastics Technology, vol. 21, no. 2, pp. 444–453, Nov. 2017, doi: https://doi.org/10.1007/s12588-017-9196-1.
A. A. Shyaa, O. A. Hasan, and A. M. Abbas, “Synthesis and Characterization of polyaniline/zeolite Nanocomposite for the Removal of Chromium (VI) from Aqueous Solution,” Journal of Saudi Chemical Society, vol. 19, no. 1, pp. 101–107, Jan. 2015, doi: https://doi.org/10.1016/j.jscs.2012.01.001.
R. S. Sabry, Y. K. Al-Haidarie, and M. A. Kudhier, "Synthesis and Photocatalytic Activity of TiO2 Nanoparticles Prepared by Sol-gel Method," Journal of Sol-Gel Science and Technology, vol. 78, no. 2, pp. 299–306, Jan. 2016, doi: https://doi.org/10.1007/s10971-015-3949-0.
N. Baig, I. Kammakakam, and W. Falath, “Nanomaterials: a Review of Synthesis Methods, Properties, Recent Progress, and Challenges,” Materials Advances, vol. 2, no. 6, pp. 1821–1871, Feb. 2021, doi: https://doi.org/10.1039/d0ma00807a.
H. A. Chlob and R. M. Fenjan, “Studying the Mechanical Properties of Hybrid Composites Using Natural Additives with Epoxy,” Journal of Engineering and Sustainable Development, vol. 26, no. 1, pp. 15–26, Feb. 2022, doi: https://doi.org/10.31272/jeasd.26.1.2.
S. Winkler, A. Thompson, C. Salisbury, M. Worswick, I. Van Riemsdijk, and R. Mayer, “Strain Rate and Temperature Effects on the Formability and Damage of Advanced High-Strength Steels,” Metallurgical and Materials Transactions A, vol. 39, no. 6, pp. 1350–1358, Apr. 2008, doi: https://doi.org/10.1007/s11661-008-9495-4.
M. P. Lebedev, O. V. Startsev, A. K. Kychkin, and V. V. Polyakov, “Effects of Cold Climates on Polymer Composite Material Properties,” Procedia Structural Integrity, vol. 30, pp. 76–81, Jan. 2020, doi: https://doi.org/10.1016/j.prostr.2020.12.013.
K. Abed, S. Faris, and Iman Naemah, “Improving the Mechanical Properties of a Composite Material Reinforced with Glass Carbon for Aircraft Application,” Al-Nahrain Journal for Engineering Sciences, vol. 26, no. 1, pp. 1–6, Feb. 2023, doi: https://doi.org/10.29194/njes.26010001.
A. A. Kadhim, M. Al-Waily, Z. A. A. A. Ali, M. J. Jweeg, and K. K. Resan, “Improvement Fatigue Life and Strength of Isotropic Hyper Composite Materials by Reinforcement with Different Powder Materials,” International Journal of Mechanical & Mechatronics Engineering, vol. 18, no. 2, 2018, Accessed: 2023. [Online]. Available: https://www.academia.edu/download/95217887/181302-9494-IJMME-IJENS.pdf
C. Chen et al., “The Influence of Moisture Absorption‐Drying of Composite Materials on the Bonding Performance of the Joints,” Macromolecular Materials and Engineering, vol. 308, no. 2, p. 2200463, Oct. 2022, doi: https://doi.org/10.1002/mame.202200463.
A. G. Airale, M. Carello, A. Ferraris, and L. Sisca, “Moisture Effect on Mechanical Properties of Polymeric Composite Materials,” AIP conference proceedings, vol. 1736, no. 1, Jan. 2016, doi: https://doi.org/10.1063/1.4949595.
M. J. Hussain, “Charpy Impact Test on Mild Steel,” International Journal of Engineering Research and Applications, vol. 11, no. 10, pp. 59–63, 2021, doi https://doi.org/10.9790/9622-1110045963.
J. Thaddaeus and I. I. Ezeaku, “An Environmental Impact Assessment of An Orc-Based Exhaust Heat Recovery System for Application in Vehicles,” Journal of Engineering and Sustainable Development, vol. 27, no. 6, pp. 671–687, Nov. 2023, doi: https://doi.org/10.31272/jeasd.27.6.1.
U. O.Costa, L. Fabio, Julianna Magalhães Garcia, W. Bruno, and Sergio Neves Monteiro, “Evaluation of Izod Impact and Bend Properties of Epoxy Composites Reinforced with Mallow Fibers,” Journal of Materials Research and Technology, vol. 9, no. 1, pp. 373–382, Jan. 2020, doi: https://doi.org/10.1016/j.jmrt.2019.10.066.
M. Subhi Attallah, “Investigation of Some Mechanical Properties for Natural (Eggshell) And Industrial (Calcium Carbonate) Material / Reinforced with Glass Fiber with Polymer Composite,” Journal of Engineering and Sustainable Development, vol. 24, no. 6, pp. 137–141, Feb. 2022, doi: https://doi.org/10.31272/jeasd.24.6.12.
O. De Almeida, J.-F. Ferrero, L. Escalé, and G. Bernhart, “Charpy Test Investigation of the Influence of Fabric Weave and Fibre Nature on Impact Properties of PEEK-reinforced Composites,” Journal of Thermoplastic Composite Materials, vol. 32, no. 6, pp. 729–745, Jun. 2018, doi: https://doi.org/10.1177/0892705718778744.
Ö. Demircan et al., “Compression after Impact and Charpy Impact Characterizations of Glass Fiber/Epoxy/MWCNT Composites,” Fibers and Polymers, vol. 21, no. 8, pp. 1824–1831, Aug. 2020, doi: https://doi.org/10.1007/s12221-020-9921-9.
N. Navaranjan and T. Neitzert, “Impact Strength of Natural Fibre Composites Measured by Different Test Methods: a Review,” MATEC Web of Conferences, vol. 109, p. 01003, 2017, doi: https://doi.org/10.1051/matecconf/201710901003.
F. S. Klak, M. Jomaa'h, and S. Ahmad, “Behavior of Reinforced Concrete Members Exposed to Fire: Review Article,” Tikrit Journal of Engineering Sciences, vol. 29, no. 4, pp. 56–68, Dec. 2022, doi: https://doi.org/10.25130/tjes.29.4.7.
S.-H. Go, H.-G. Kim, H.-J. Shin, M.-S. Lee, H.-G. Yoon, and L.-K. Kwac, “The Impact Fracture Behaviors of CFRP/EVA Composites by drop-weight Impact Test,” Carbon letters, vol. 21, pp. 23–32, Jan. 2017, doi: https://doi.org/10.5714/cl.2017.21.023.
A. Daraje, A. Awad, M. Gogazeh, and M. Khamees, “Impact of Measurements Techniques on Heat Transfer Characteristics In Air Jet Arrays,” Journal of Engineering and Sustainable Development, vol. 28, no. 1, pp. 17–34, Jan. 2024, doi: https://doi.org/10.31272/jeasd.28.1.2.
Q. Najm, A. I. Abdulla, and M Al-Mashaykhi, “Shear Behavior of Hollow Ferrocement Beam Reinforced by Steel and Fiberglass Meshes,” Tikrit Journal of Engineering Science, vol. 29, no. 4, pp. 27–39, Dec. 2022, doi: https://doi.org/10.25130/tjes.29.4.4.
S. M. Abbas, K. K. Resan, A. K. Muhammad, and M. Al-Waily, “Mechanical and Fatigue Behaviors of Prosthetic for Partial Foot Amputation with Various Composite Materials Types effect.,” International Journal of Mechanical Engineering and Technology, vol. 9, no. 9, pp. 383–394, 2018, Accessed: 2023. [Online]. Available: https://iaeme.com/MasterAdmin/Journal_uploads/IJMET/VOLUME_9_ISSUE_9/IJMET_09_09_042.pdf
Downloads
Key Dates
Received
Revised
Accepted
Published Online First
Published
Issue
Section
License
Copyright (c) 2024 Hasan Abbas Flayyih, Fadhel Abbas Abdulla, Alaa Almansoori (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
