A COMPREHENSIVE REVIEW STUDY ON HEAT TRANSFER IMPROVEMENT TECHNIQUES WITHIN TWISTED TUBES

Authors

  • Baraa Mohammed Mechanical engineering Department Mustansiriyah University, Baghdad, Iraq Author
  • Saad Najeeb Shehab Mechanical Engineering Department, Mustansiriyah University , Baghdad, Iraq Author

DOI:

https://doi.org/10.31272/jeasd.27.6.12

Keywords:

Heat Exchanger, Passive Method, Twisted Tube, Nano-fluid, Heat exchanger, swirl flow

Abstract

Heat transfer equipment has been used in many different domestic and industrial applications. There has been a concentrated effort to create a heat exchanger design that will reduce energy requirements while saving materials and other costs. Increasing the effective heat transfer surface area or creating turbulence are two common ways to improve heat transfer and hence lower thermal resistance. The thermal Performance Factor is the ratio of the difference in heat transfer rate to the difference in friction factor and serves as a metric to assess the efficiency of heat transfer enhancement technologies. Different types of twisted tubes are used in many heat transfer improvement devices. geometrical parameters of the twisted tube encompassing the aspect ratio, twist ratio, twist direction, twist length, etc. impact the heat transfer. For Instance, oval pipes with unequal twist pitches have a thermal performance factor (1.75) and equal twist pitches have a thermal performance factor (1.98). furthermore, the thermal performance factor of the twisted tube with oval dimples is equal to 1.19 compared with the twisted tube without dimples. The thermal performance factor of the twisted tube with oval dimples is equal to 1.38 compared with the straight tube, with another improvement to the twisted tube that improves the heat transfer properties by disrupting the thermal boundary layer and destabilizing it. This paper presents a comprehensive investigation of passive heat transfer devices (twisted tubes) and their relative merits in a myriad of commercial applications.

References

Stehlík, P., & Wadekar, V. V. (2002). Different Strategies to Improve Industrial Heat Exchange. Heat Transfer Engineering, Vol. 23, Issue 6, pp. 36–48. https://doi.org/10.1080/01457630290098673

Dewan, A., Mahanta, P., Raju, K. S., & Kumar, P. S. (2004). Review of passive heat transfer augmentation techniques. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 218, Issue 7, pp. 509-527 https://doi.org/10.1243/0957650042456953

Liu, S., & Sakr, M. (2013). A comprehensive review on passive heat transfer enhancements in pipe exchangers. Renewable and Sustainable Energy Reviews, Vol. 19 , Issue 1, pp. 64–81. https://doi.org/10.1016/j.rser.2012.11.021

Sheikholeslami, M., Gorji-Bandpy, M., & Ganji, D. D. (2015). Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices. Renewable and Sustainable Energy Reviews, Vol. 49, Issue1, pp. 444–469. https://doi.org/10.1016/j.rser.2015.04.113

Ru-xiong, L. I. (2012). Design and Realization of 3-DOF Welding Manipulator Control System Based on Motion Controller. Energy Procedia, Vol. 14, Issue 1, pp. 931–936. https://doi.org/10.1016/j.egypro.2011.12.1035

Kassim, M. S., Saleh, F. A., & Taher, S. T. (2018). NUMERICAL INVESTIGATIONS OF THE THERMO-HYDRAULIC CHARACTERISTICS FOR TURBULENT FLOW CHANNEL WITH QUADRUPLE PLAIN AND MODIFIED TWISTED TAPES INSERTS. Journal of Engineering and Sustainable Development, Vol. 22, Issue 5, pp.19-32.‏

http://dx.doi.org/10.31272/jeasd.2018.5.3

Rezaei Gorjaei, A., & Shahidian, A. (2019). Heat transfer enhancement in a curved tube by using twisted tape insert and turbulent nanofluid flow. Journal of Thermal Analysis and Calorimetry, Vol. 137, Issue 3, pp. 1059–1068. https://doi.org/10.1007/s10973-019-08013-1

Eiamsa-ard, S., Somkleang, P., Nuntadusit, C., & Thianpong, C. (2013). Heat transfer enhancement in tube by inserting uniform/non-uniform twisted-tapes with alternate axes: Effect of rotated-axis length. Applied Thermal Engineering, Vol. 54, Issue 1, pp. 289–309. https://doi.org/10.1016/j.applthermaleng.2013.01.041

Tan, X., Zhu, D., Zhou, G., & Zeng, L. (2013). Heat transfer and pressure drop performance of twisted oval tube heat exchanger. Applied Thermal Engineering, Vol. 50, Issue 1, pp. 374–383. https://doi.org/10.1016/j.applthermaleng.2012.06.037

Kumar, A., Singh, S., Chamoli, S., & Kumar, M. (2018). Experimental Investigation on Thermo-Hydraulic Performance of Heat Exchanger Tube with Solid and Perforated Circular Disk Along with Twisted Tape Insert. Heat Transfer Engineering, Vol. 40, Issue 8, pp. 616–626. https://doi.org/10.1080/01457632.2018.1436618

Thianpong, C., Eiamsa-ard, P., & Eiamsa-ard, S. (2011). Heat transfer and thermal performance characteristics of heat exchanger tube fitted with perforated twisted-tapes. Heat and Mass Transfer, Vol. 48, Issue 6, pp. 881–892. https://doi.org/10.1007/s00231-011-0943-0

Dyga, R., & Płaczek, M. (2010). Efficiency of heat transfer in heat exchangers with wire mesh packing. International Journal of Heat and Mass Transfer, Vol. 53, Issue 23–24, pp. 5499–5508. https://doi.org/10.1016/j.ijheatmasstransfer.2010.07.007

Vicente, P. G., Garcı́a, A., & Viedma, A. (2002). Heat transfer and pressure drop for low Reynolds turbulent flow in helically dimpled tubes. International Journal of Heat and Mass Transfer, Vol. 45, Issue 3, pp. 543–553.

https://doi.org/10.1016/s0017-9310(01)00170-3.

Piriyarungrod, N., Eiamsa-ard, S., Thianpong, C., Pimsarn, M., & Nanan, K. (2015). Heat transfer enhancement by tapered twisted tape inserts. Chemical Engineering and Processing: Process Intensification, Vol. 96, Issue 1, pp. 62–71. https://doi.org/10.1016/j.cep.2015.08.002

Hasan, S., & Naji, Z. H. (2023). AUGMENTATION HEAT TRANSFER IN A CIRCULAR TUBE USING TWISTED-TAPE INSERTS: A REVIEW. Journal of Engineering and Sustainable Development, Vol. 27, Issue 4, pp. 511-526.‏ https://doi.org/10.31272/jeasd.27.4.8

Luo, C., Song, K., Tagawa, T., & Liu, T. (2020). Heat Transfer Enhancement in a Novel Annular Tube with Outer Straight and Inner Twisted Oval Tubes. Symmetry, Vol. 12, Issue 8, pp. 1213. https://doi.org/10.3390/sym12081213

Luo, C., & Song, K. (2021). Thermal performance enhancement of a double-tube heat exchanger with novel twisted annulus formed by counter-twisted oval tubes. International Journal of Thermal Sciences, Vol. 164, Issue 1, pp. 106892. https://doi.org/10.1016/j.ijthermalsci.2021.106892

Luo, C., Song, K., & Tagawa, T. (2021). Heat transfer enhancement of a double pipe heat exchanger by Co-Twisting oval pipes with unequal twist pitches. Case Studies in Thermal Engineering, Vol. 28, Issue 1, pp. 101411. https://doi.org/10.1016/j.csite.2021.101411

Yu, C., Zhang, H., Wang, Y., Zeng, M., & Gao, B. (2020). Numerical study on turbulent heat transfer performance of twisted oval tube with different cross sectioned wire coil. Case Studies in Thermal Engineering, Vol. 22, Issue 1, pp. 100759. https://doi.org/10.1016/j.csite.2020.100759

Li, X., Zhu, D., Yin, Y., Tu, A., & Liu, S. (2019). Parametric study on heat transfer and pressure drop of twisted oval tube bundle with in line layout. International Journal of Heat and Mass Transfer, Vol. 135, Issue 1, 860–872. https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.031

Li, X., Wang, L., Feng, R., Wang, Z., Liu, S., & Zhu, D. (2021). Study on shell side heat transport enhancement of double tube heat exchangers by twisted oval tubes. International Communications in Heat and Mass Transfer, Vol. 124, Issue 1, pp. 105273. https://doi.org/10.1016/j.icheatmasstransfer.2021.105273

Gu, H., Chen, Y., Sundén, B., Wu, J., Song, N., & Su, J. (2020). Influence of alternating V-rows tube layout on thermal-hydraulic characteristics of twisted elliptical tube heat exchangers. International Journal of Heat and Mass Transfer, Vol. 159, Issue 1, pp. 120070. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120070

Gu, H., Chen, Y., Wu, J., & Sunden, B. (2020). Performance investigation on twisted elliptical tube heat exchangers with coupling-vortex square tube layout. International Journal of Heat and Mass Transfer, Vol. 151, Issue 1, pp. 119473. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119473

Tan, X., Zhu, D., Zhou, G., & Yang, L. (2013). 3D numerical simulation on the shell side heat transfer and pressure drop performances of twisted oval tube heat exchanger. International Journal of Heat and Mass Transfer, Vol. 65, Issue 1, pp. 244–253. https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.011

Cheng, J., Qian, Z., & Wang, Q. (2017). Analysis of heat transfer and flow resistance of twisted oval tube in low Reynolds number flow. International Journal of Heat and Mass Transfer, Vol. 109, Issue 1, pp. 761–777. https://doi.org/10.1016/j.ijheatmasstransfer.2017.02.061

Tan, X., Zhu, D., Zhou, G., & Zeng, L. (2012). Experimental and numerical study of convective heat transfer and fluid flow in twisted oval tubes. International Journal of Heat and Mass Transfer, Vol. 55, Issue 17–18, pp. 4701–4710. https://doi.org/10.1016/j.ijheatmasstransfer.2012.04.030

Zhang, L., Yang, S., & Xu, H. (2012). Experimental study on condensation heat transfer characteristics of steam on horizontal twisted elliptical tubes. Applied Energy, Vol. 97, Issue 1, pp.881–887. https://doi.org/10.1016/j.apenergy.2011.11.085

Ebrahimi, A., & Roohi, E. (2015). Numerical study of flow patterns and heat transfer in mini twisted oval tubes. International Journal of Modern Physics C, Vol. 26, Issue 12, pp. 1550140. https://doi.org/10.1142/s0129183115501405

Bhattacharyya, S., Benim, A., Chattopadhyay, H., & Banerjee, A. (2019). Experimental and numerical analysis of forced convection in a twisted tube. Thermal Science, Vol. 23, Issue 4, pp. 1043–1052. https://doi.org/10.2298/tsci19s4043b

Abdul Razzaq, A. K., & Mushatet, K. S. (2021). A Numerical Study for a Double Twisted Tube Heat Exchanger. International Journal of Heat and Technology, Vol. 39, Issue 5, pp. 1583–1589. https://doi.org/10.18280/ijht.390521

Ali, M. H., & Jalal, R. E. (2021). Experimental investigation of heat transfer enhancement in a double pipe heat exchanger with a twisted inner pipe. Heat Transfer, Vol. 50, Issue 8, pp. 8121–8133. Portico. https://doi.org/10.1002/htj.22269

Li, X., Wang, L., Feng, R., Wang, Z., & Zhu, D. (2021). Thermal-Hydraulic Characteristics of Twisted Elliptical Tube Bundle in Staggered Arrangement. Journal of Thermal Science, Vol. 30, Issue 6, pp. 1925–1937. https://doi.org/10.1007/s11630-021-1450-3

Bhattacharyya, S., Chattopadhyay, H., Pal, T. K., & Roy, A. (2016). Numerical Investigation of Thermohydraulics Performance in Elliptical Twisted Duct Heat Exchanger. CAD/CAM, Robotics and Factories of the Future, pp. 839–849. https://doi.org/10.1007/978-81-322-2740-3_81

Al-Salihi, H. A., Hoshi, H. A., & Abed, A. H. (2022). Experimental Analysis of Twisted Tube Ground Heat Exchanger with Different Configuration. SSRN Electronic Journal. https://doi.org/10.2139/ssrn.4051679

Cheng, J., Qian, Z., Wang, Q., Fei, C., & Huang, W. (2018). Numerical study of heat transfer and flow characteristic of twisted tube with different cross section shapes. Heat and Mass Transfer, Vol. 55, Issue 3, pp. 823–844. https://doi.org/10.1007/s00231-018-2471-7

Mahato, S. K., Rana, S. C., & Barman, R. N. (2021, May). Heat transfer and fluid flow characteristics within non-circular duct. In IOP Conference Series: Materials Science and Engineering ,Vol. 1146, Issue 1, pp. 012013. IOP Publishing.‏ https://doi.org/10.1088/1757-899x/1146/1/012013

Bhadouriya, R., Agrawal, A., & Prabhu, S. V. (2015). Experimental and numerical study of fluid flow and heat transfer in an annulus of inner twisted square duct and outer circular pipe. International Journal of Thermal Sciences, Vol. 94, Issue 1, pp. 96–109. https://doi.org/10.1016/j.ijthermalsci.2015.02.019

Bhadouriya, R., Agrawal, A., & Prabhu, S. V. (2015). Experimental and numerical study of fluid flow and heat transfer in a twisted square duct. International Journal of Heat and Mass Transfer, Vol. 82, Issue 1, pp. 143–158. https://doi.org/10.1016/j.ijheatmasstransfer.2014.11.054

K. S. Mushatet and H. M. Hmood, “Numerical Investigation for Heat Transfer Enhancement in a Triangular Twisted Tube,” ARPN J. Eng. Appl. Sci., Vol. 16, Issue 5, https://doi.org/10.1063/1.5079018

Wang, L.-B., Tao, W.-Q., Wang, Q.-W., & He, Y.-L. (2001). Experimental and Numerical Study of Turbulent Heat Transfer in Twisted Square Ducts. Journal of Heat Transfer, Vol. 123, Issue 5, pp. 868–877. https://doi.org/10.1115/1.1389464

Pozrikidis, C. (2015). Stokes flow through a twisted tube with square cross-section. European Journal of Mechanics - B/Fluids, Issue 51, pp. 37–43. https://doi.org/10.1016/j.euromechflu.2014.12.005

Tang, X., Dai, X., & Zhu, D. (2015). Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube. International Journal of Heat and Mass Transfer,Vol. 90, Issue, pp. 523–541. https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.068

Rashed, M. K., Jehhef, K. A., & Badawy, F. A. (2022). Numerical Study on Thermal Performance of Water Flow in a Twisted Duct Heat Exchanger. International Journal of Applied Mechanics and Engineering, Vol. 27, Issue 2, pp. 199–216. https://doi.org/10.2478/ijame-2022-0028

Makarov, M. S., & Naumkin, V. S. (2018). Heat transfer in helium-xenon mixture flowing in straight and twisted tubes with square cross-section. Journal of Physics: Conference Series, Vol. 1128, Issue 1, pp. 012020. https://doi.org/10.1088/1742-6596/1128/1/012020

Soleimani, P., Khoshvaght-Aliabadi, M., Rashidi, H., & Bahmanpour, H. (2020). Performance enhancement of water bath heater at natural gas city gate station using twisted tubes. Chinese Journal of Chemical Engineering, Vol. 28, Issue 1, pp. 165–179. https://doi.org/10.1016/j.cjche.2019.03.018

Dong, X., Jin, X., Li, P., Bi, Q., Gui, M., & Wang, T. (2020). Experimental research on heat transfer and flow resistance properties in spiral twisted tube heat exchanger. Applied Thermal Engineering, Vol. 176, pp. 115397. https://doi.org/10.1016/j.applthermaleng.2020.115397

Mohammed, H. A., Hasan, H. A., & Wahid, M. A. (2013). Heat transfer enhancement of nanofluids in a double pipe heat exchanger with louvered strip inserts. International Communications in Heat and Mass Transfer, Vol. 40, pp. 36–46. https://doi.org/10.1016/j.icheatmasstransfer.2012.10.023

Bahmani, M. H., Sheikhzadeh, G., Zarringhalam, M., Akbari, O. A., Alrashed, A. A., Shabani, G. A. S., & Goodarzi, M. (2018). Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger. Advanced Powder Technology, Vol. 29, Issue 2, pp. 273-282.‏ https://doi.org/10.1016/j.apt.2017.11.013

Hamza, noor, & Aljabair, S. (2022). Numerical and Experimental Investigation of Heat Transfer Enhancement by Hybrid Nanofluid and Twisted Tape. Engineering and Technology Journal, Vol. 41, Issue 1 , pp. 69–85. https://doi.org/10.30684/etj.2022.131909.1069

Mahato, S. K., Rana, S. C., Barman, R. N., & Goswami, S. (2019). Numerical analysis of heat transfer and fluid flow through the twisted square duct (TSD): Nanofluid as working fluid. Journal of Mechanical Science and Technology, Vol. 33, Issue 11, pp. 5507–5514. https://doi.org/10.1007/s12206-019-1043-1

Abdulrazzaq, T., Homod, R., & Togun, H. (2021). Augmentation of heat transfer and Al2O3-nanofluid flow over vertical double forward-facing step (DFFS). Int Rev Model Simul, Vol. 14, pp. 194-203.‏ https://doi.org/10.1615/heattransres.2019029789

K. Mushatet, “Numerical prediction for turbulent flow and heat transfer in elliptical twisted tube 6th ASIA PACIFIC International Modern Sciences Congress,” no. February, 2022. https://doi.org/10.17932/ejeas.2021.024/ejeas_v02i2005

Shahsavar, A., Bakhshizadeh, M. A., Arici, M., Afrand, M., & Rostami, S. (2020). Numerical study of the possibility of improving the hydrothermal performance of an elliptical double-pipe heat exchanger through the simultaneous use of twisted tubes and non-Newtonian nanofluid. Journal of Thermal Analysis and Calorimetry, Vol. 143, Issue 3, pp. 2825–2840. https://doi.org/10.1007/s10973-020-10201-3

Eltaweel, M., Abdel‐Rehim, A. A., & Hussien, H. (2020). Indirect thermosiphon flat‐plate solar collector performance based on twisted tube design heat exchanger filled with nanofluid. International Journal of Energy Research, Vol. 44, Issue 60, pp. 4269–4278. Portico. https://doi.org/10.1002/er.5146

Khoshvaght-Aliabadi, M., & Arani-Lahtari, Z. (2016). Proposing new configurations for twisted square channel (TSC): Nanofluid as working fluid. Applied Thermal Engineering, Vol. 108, pp. 709–719. https://doi.org/10.1016/j.applthermaleng.2016.07.173

Sun, B., Yang, A., & Yang, D. (2017). Experimental study on the heat transfer and flow characteristics of nanofluids in the built-in twisted belt external thread tubes. International Journal of Heat and Mass Transfer, Vol. 107, pp. 712–722. https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.084

Omidi, M., Rabienataj Darzi, A. A., & Farhadi, M. (2019). Turbulent heat transfer and fluid flow of alumina nanofluid inside three-lobed twisted tube. Journal of Thermal Analysis and Calorimetry, Vol. 137, Issue 4, pp. 1451–1462. https://doi.org/10.1007/s10973-019-08026-w

Khoshvaght-Aliabadi, M., Khaligh, S. F., & Tavassoli, Z. (2018). An investigation of heat transfer in heat exchange devices with spirally-coiled twisted-ducts using nanofluid. Applied Thermal Engineering, Vol. 143, pp. 358–375. https://doi.org/10.1016/j.applthermaleng.2018.07.112

Wang, T., Zhang, Q., Song, K., Zhang, K., Su, M., & Wu, X. (2022). Thermodynamic characteristics of a novel combination of three-start twisted tube and oval dimples. Case Studies in Thermal Engineering, Vol. 37, pp. 102284. https://doi.org/10.1016/j.csite.2022.102284

Alsulaiei, Z. M. A., Hasan, H. M., & Fagr, M. H. (2021). Flow and heat transfer in obstacled twisted tubes. Case Studies in Thermal Engineering, Vol. 27, pp. 101286. https://doi.org/10.1016/j.csite.2021.101286

Samruaisin, P., Kunlabud, S., Kunnarak, K., Chuwattanakul, V., & Eiamsa-ard, S. (2019). Intensification of convective heat transfer and heat exchanger performance by the combined influence of a twisted tube and twisted tape. Case Studies in Thermal Engineering, Vol. 14, pp. 100489. https://doi.org/10.1016/j.csite.2019.100489

Eiamsa-ard, S., Promthaisong, P., Thianpong, C., Pimsarn, M., & Chuwattanakul, V. (2016). Influence of three-start spirally twisted tube combined with triple-channel twisted tape insert on heat transfer enhancement. Chemical Engineering and Processing: Process Intensification, Vol. 102, pp. 117–129. https://doi.org/10.1016/j.cep.2016.01.012

Downloads

Key Dates

Published

2023-11-01

How to Cite

A COMPREHENSIVE REVIEW STUDY ON HEAT TRANSFER IMPROVEMENT TECHNIQUES WITHIN TWISTED TUBES. (2023). Journal of Engineering and Sustainable Development, 27(6), 823-839. https://doi.org/10.31272/jeasd.27.6.12

Similar Articles

1-10 of 559

You may also start an advanced similarity search for this article.