EFFECT OF ADSORPTION CONDITIONS ON THE REMOVAL OF LEAD (II) USING SEWAGE SLUDGE AS ADSORBENT MATERIAL

Authors

  • Ahmed M. Fat’hi Environmental Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq Author
  • Ahmed H. Ali Environmental Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq Author

DOI:

https://doi.org/10.31272/jeasd.26.3.1

Keywords:

lead(II), sewage sludge, adsorption, adsorption conditions, removal efficiency

Abstract

The introduction of more stringent legislation limiting the disposal and use of sewage sludge, combined with an increase in its production and the loss of previously recognized disposal routes, has sparked a search for alternate applications for sewage sludge. The conversion of sludge into adsorbents is one of the promising technologies give a more stable treatment of sludge. In a batch mode adsorption, adsorbent created by recycling sewage sludge was employed as a sustainable and low-cost material to remove pb (II) ions from manufactured polluted aqueous solutions. A laboratory test was done to determine the influence of a variety of operational parameters on Pb (II) adsorption, including the acidic function (pH), absorbent dosage, agitation speed, agitation period, and initial   concentration at room temperature. The maximum removal efficiency was 88.2 % at optimum factors pH=4, agitation time =250 rpm, agitation time=180 min, adsorbent dose=1.5 g and initial concentration=50 (mg/l). In this way sewage sludge, which pollutes the environment and is costly to treat, may be disposed of in a useful and economic way to achieve the lowest pb (II) concentration level.

Downloads

Published

2022-05-01

How to Cite

EFFECT OF ADSORPTION CONDITIONS ON THE REMOVAL OF LEAD (II) USING SEWAGE SLUDGE AS ADSORBENT MATERIAL. (2022). Journal of Engineering and Sustainable Development, 26(3), 1-9. https://doi.org/10.31272/jeasd.26.3.1