تحسين خواص خليط بوليمري بتدعيمه مواد مختلفة

A. K. Singh, R. Bedi, and B. S. Kaith, “Mechanical properties of composite materials based on waste plastic–A review,” Mater. Today Proc., vol. 26, pp. 1293–1301, 2020, doi:https:/doi.org/10.1016/j.matpr.2020.02.258

R. Hsissou, R., Seghiri, Z., Benzekri, M., Hilali, M., Rafik, and A. Elharfi, “Polymer composite materials: A comprehensive review,” Compos. Struct., vol. 262, p. 113640, 2021, doi: https://doi.org/10.1016/j.compstruct.2021.113640

Z. A. Abbas and S. H. Aleabi, “Studying some of mechanical properties (tensile, impact, hardness) and thermal conductivity of polymer blend reinforce by magnesium oxide,” in AIP Conference Proceedings, vol. 2123, p. 020036, 2019, doi: https://doi.org/10.1063/1.5116963

F. Ahmadijokani, A. Shojaei, S. Dordanihaghighi, E. Jafarpour, S. Mohammadi, and M. Arjmand, “Effects of hybrid carbon-aramid fiber on performance of non-asbestos organic brake friction composites,” Wear, vol. 452–453, no. 15, p. 203280, 2020, doi: https://doi.org/10.1016/j.wear.2020.203280

A. Arabpour, A. Shockravi, H. Rezania, and R. Farahati, “Investigation of anticorrosive properties of novel silane-functionalized polyamide/GO nanocomposite as steel coatings,” Surfaces and Interfaces, vol. 18, p. 100453, 2020, doi: https://doi.org/10.1016/j.surfin.2020.100453

M. S. Hassan, Y. K. Ibrahim, and I. I. Marhoon, “Investigation of Mechanical Characteristics of (Epoxy-Resole Blend) Matrix Hybrid Composite”, J. Eng. Sustain. Dev., vol. 26, no. 3, pp. 27–32, May 2022, doi: https://doi.org/10.31272/jeasd.26.3.4

C. Fabris, D. Perin, G. Fredi, D. Rigotti, M. Bortolotti, A. Pegoretti, E. Xanthopoulou, D. N. Bikiaris, and A. Dorigato, “Improving the wet-spinning and drawing processes of poly(lactide)/poly(ethylene furanoate) and polylactide/poly(dodecamethylene furanoate) fiber blends,” Polymers, vol. 14, no. 14, p. 2910, 2022, doi:https:/doi.org/10.3390/polym14142910

M. A. Younus and M. U. Ali, “Synthesis and Antibacterial Activity of PEG Polycyclic Acetal Metal Complex/ PVA Polymer Blend Film”, Ibn AL-Haitham Journal For Pure and Applied Sciences, vol. 33, no. 3, pp. 44–54, Jul. 2020, doi: https://doi.org/10.30526/33.3.2472

M. Stuck, I. Krenz, B. Schulze Kökelsum, S. Boye, B. Voit, and R. Lorenz, “Improving glass transition temperature of unsaturated polyester thermosets: Conventional unsaturated polyester resins,” J. Appl. Polym. Sci., vol. 138, no. 6, p. e49825, 2021, doi: https://doi.org/10.1002/app.49825

S. Q. Ibrahim, “Investigation Physical and Mechanical Properties of Unsaturated Polyester Reinforced with Different Additives,” M.S. thesis, Dept. Mat. Eng., Mustansiriyah Univ., Baghdad, Iraq, 2017.

M. Bakar, R. Duk, M. Przybyłek, and M. Kostrzewa, “Mechanical and thermal properties of epoxy resin modified with polyurethane,” J. Reinf. Plast. Compos., vol. 28, no. 17, pp. 2107–2118, 2009, doi: https://doi.org/10.1177/0731684408091703

A. A. Megahed, F. Abd El-Wadoud, A. Wagih, and A. M. Kabeel, “Effect of incorporating aluminum wire mesh on the notched and un-notched strengths of glass fiber/epoxy composites,” Compos. Struct., vol. 263, p. 113695, 2021, doi: https://doi.org/10.1016/j.compstruct.2021.113695

A. H. Majeed, “Enforcement of epoxy with silica fume and carbon fiber,” Tikrit J. Eng. Sci., vol. 25, no. 1, pp. 74–77, 2018, doi: https://doi.org/10.25130/tjes.25.1.11

A. Q. Moften, I. I. Marhoon, and Y. K. Ibrahim, “Effect of Metal Wire Mesh on Tensile, Compression and Water Absorption for Blend Polymer”, J. Eng. sustain. dev., vol. 26, no. 4, pp. 44–51, Jul. 2022, doi: https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1574

A. J. Farhan and H. I. Jaffer, “Investigation of the Thermal Conductivity of Binary Polymer Blends,” in IOP Conference Series: Materials Science and Engineering, Apr. 2020, vol. 757, no. 1, doi: https://doi.org/10.1088/1757-899X/757/1/012019

ASTM D790-15, “Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials,” ASTM International, West Conshohocken, PA, USA, 2015.

ISO 179-1:2010, Plastics—Determination of Charpy impact properties—Part 1: Non-instrumented impact test, International Organization for Standardization, Geneva, Switzerland, 2010.

ASTM D2240-15, “Standard test method for rubber property—Durometer hardness,” ASTM International, West Conshohocken, PA, USA, 2015.

S. M. Al-Obaidy and A. K. Al-Noori, “Thermal Conductivity of Polymethyl Methacrylate Denture Base Material Incorporated with Hydroxyapatite Nanoparticles,” Al-Rafidain Dent. J., vol. 24, no. 1, pp. 47–53, 2024, doi: https://doi.org/10.33899/rdenj.2022.134368.1164

A. A. Abdul-Hamead, T. Kasim, and A. A. Mohammed, “Mechanical Properties for Polyester resin Reinforce with Fe Weave Wire,” Inter Natl. J. Appl. or Innov. Eng. Manag., vol. 3, no. 7, pp. 8–12, 2014, https://api.semanticscholar.org/CorpusID:53543706.

I. Alameri and M. Oltulu, “Mechanical properties of polymer composites reinforced by silica-based materials of various sizes,” Appl. Nanosci., vol. 10, no. 11, pp. 4087–4102, 2020, doi: https://doi.org/10.1007/s13204-020-01516-6

S. Dayanand and S. B. Boppana, “Manufacturing of particulate and fiber reinforced composites: A review,” in Structural Composite Materials: Fabrication, Properties, Applications and Challenges, S. B. Boppana, C. G. Ramachandra, K. P. Kumar, and S. Ramesh, Eds. Singapore: Springer, 2024, pp. 119–142, doi: https://doi.org/10.1007/978-981-99-5982-2_8

B. M. Deya, D. M. Hussien, and I. Gatia Dway, “Studying the Impact Strength of (Epoxy with TiO2 and MgO) Composite,” Eng. Tech. J., vol. 29, no. 10, pp. 1971–1978, 2011, https://mail.uotechnology.edu.iq/tec_magaz/volum292011/No.10.2011/text/Text%20(9).pdf

S. H. Kamel, “Studying Some of the Mechanical Properties of Unsaturated Polyester Reinforced by Re-Cycled Natural Materials,” Al-Qadisiyah J. Eng. Sci., vol. 8, no. 2, pp. 137–146, 2015, [Online]. Available: https://qjes.qu.edu.iq/article_102452_6a9f4d343f6f23272d099ba81552ec36.pdf

I. A. Tsekmes, R. Kochetov, P. H. F. Morshuis and J. J. Smit,, “Thermal Conductivity of Polymeric Composites : A Review,” in IEEE International Conference on Solid Dielectrics, 2013, June, pp. 678–681, doi: https://doi.org/10.1109/ICSD.2013.6619698.