NUMERICAL INVESTIGATION OF FORCED CONVECTION HEAT TRANSFER ON INLINE CYLINDERS IMMERSED IN A POROUS MEDIA
DOI:
https://doi.org/10.31272/jeasd.27.5.2Keywords:
porous media beds, cylinders immersed, in-line patterns, heat transferAbstract
In the present study, forced convection heat transfer on eight inline cylinders immersed in a 10 × 10 × 30 cm packed bed of porous medium is numerically explored with a range of Reynolds numbers from 1100 to 2250. The airflow passes through eight cylinders with an inline arrangement, each having a diameter of 15 mm and a length of 10 cm, immersed in a horizontal porous channel at a constant heat flux of 2000W/m2. The commercial program ANSYS Fluent R.19 simulates the changes in pressure drop and temperature distribution by changing the Reynolds number and porosity. The dimensions of each porous pack are 10x10 cm in cross-section, 5 cm in length, and 5 cm in spacing from the next porous pack. The porosity values are (0.4001, 0.39112, and 0.3822). The general shape of all temperature contours shows that the high porosity near the cylinder wall enhances heat transfer from the heated cylinder surface. After that, the air temperature gradually decreases when going away from the cylinder surface. It can also be seen that the pressure drop decreases as particle diameter increases.
References
Sayehvand, H. O., Yari, S. M., & Basiri, P. A. (2018). Numerical study of forced convection heat transfer over three cylinders in staggered arrangement immersed in porous media. Thermal Science, vol. 22, No. 1B, PP.467-475. https://doi.org/10.2298/tsci150808249s
Hilal, K. H., Omran, S. H., & Abdulla, M. L. (2013). Effect of Solid Particle Properties on Heat Transfer and Pressure Drop in Packed Duct. Al-Khwarizmi Engineering Journal, Vol.9, No. 2, PP. 33-47. https://doi.org/10.1615/ihtc8.3720
Li, H. Y., Leong, K. C., Jin, L. W., & Chai, J. C. (2010). Analysis of fluid flow and heat transfer in a channel with staggered porous blocks. International Journal of Thermal Sciences, Vol .49, No. 6, PP.950-962. https://doi.org/10.1016/j.ijthermalsci .2010.01.006
Layeghi, M., & Nouri-Borujerdi, A. (2006). Darcy model for the study of the fluid flow and heat transfer around a cylinder embedded in porous media. International Journal for Computational Methods in Engineering Science and Mechanics, Vol.7.No 5, PP.323-329. https://doi.org/10.1080/15502280600826340
Eleiwi, Muhammad. (2012). Theoretical and Experimental Study of Forced Convection Heat Transfer from a Horizontal Cylinder Embedded in Porous Medium. Journal of Kirkuk University Scientific, Vol.7. PP.1-21. https://doi.org/10.32894/kujss.2012.63538
Al-Sumaily, G. F., Sheridan, J., & Thompson, M. C. (2012). Analysis of forced convection heat transfer from a circular cylinder embedded in a porous medium. International journal of thermal sciences, Vol. 51, PP.121-131. https://doi.org/10.1016/j.ijthermalsci.2011.08.018
Habeeb, L. J., Mashkour, M. A., & Jaber, H. J. (2012). Experimental Study of Forced Convection Heat Transfer in a Partially Opened Box Filled with Porous Medium. In Proceedings of International Conference on Engineering and Information Technology. pp. 17-19.
Al-Sumaily, G. F., & Thompson, M. C. (2013). Forced convection from a circular cylinder in pulsating flow with and without the presence of porous media. International Journal of Heat and Mass Transfer, Vol.61, PP.226-244. https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.067
Aya adnan, (2013). Experimental and Numerical investigation of forced convection in a porous media subjected to constant heat flux, M.Sc. Thesis, Mechanical Engineering Department, Baghdad University, Baghdad, Iraq.
Al-Sumaily, G. F. (2014). Forced convection heat transfer from a bank of circular cylinders embedded in a porous medium. Journal of heat transfer, Vol.136. https://doi.org/10.1115/1.4025661
Fadhl, L. T. (2015). Experimental and Numerical Study of Convection Heat Transfer in Plate Channels Filled with Plastic Particles. Journal of Techniques, Vol.28, No.1.
Koundinya, S., Vigneshkumar, N., & Krishnan, A. S. (2016). Computational and experimental study of fluid flow and heat flow characteristics in porous media. In IOP Conference Series: Materials Science and Engineering, Vol. 149, No. 1, PP. 012222. IOP Publishing.https://doi.org/10.1088/1757-899x/149/1/012222
Sayehvand, H. O., Dehkordi, K. E., & Basiri, P. A. (2017). Numerical analysis of forced convection heat transfer from two tandem circular cylinders embedded in a porous medium. Thermal Science, Vol.21, No.5, PP. 2117-2128. https://doi.org/10.2298/tsci150307081s
Pipatana Amatachaya and Bundit Krittacom. (2017). Combustion Mechanism of Gas Porous Burner Installed an Inline Tube-Bank Heat Exchanger. Energy Procardia, Vol.138, PP.50-55. https://doi.org/10.1016/j.egypro.2017.10.045
Rasheed, S. A., & Abood, J. M. (2017). Force Convection Heat transfer from a Different Cross Section Cylinder Embedded in Porous Media. Al-Nahrain Journal for Engineering Sciences, Vol.20, No.3, PP. 727-736.
Saleh, A. M., Rasheed, S., & Smasem, R. (2018). Convection Heat Transfer in a Channel of Different Cross Section Filled with Porous Media. Kufa Journal of Engineering, Vol.9, No. 2, PP.57-73. https://doi.org/10.1007/s11242-018-1195-y
Alvandifar, N., Saffar-Avval, M., & Amani, E. (2019). An investigation of flow across porous layer wrapped flat tube banks. Transport in Porous Media, Vol.127, No.2, PP.329-352. https://doi.org/10.1007/s11242-018-1195-y
Chakkingal, M., Schiavo, S., Ataei-Dadavi, I., Tummers, M. J., Kleijn, C. R., & Kenjereš, S. (2020). Effect of packing height and location of porous media on heat transfer in a cubical cavity Are extended Darcy simulations sufficient. International Journal of Heat and Fluid Flow, Vol.84, 108617. https://doi.org/10.1016/j.ijheatfluidflow.2020.108617
Abeer Aamer and suhad Abd-hameed. (2020). Experimental and Theoretical Study of Forced Convection around a Cylinder Embedded in Porous Media. The Iraqi Journal for Mechanical and Material Engineering, Vol.20, No.2. https://doi.org/10.32852/iqjfmme.v20i2.497
Youssif, Y. F., Kadhum, M. H., & Ali, A. H. (2020). Experimental study for laminar forced convection heat transfer enhancement from horizontal tube heated with constant heat flux by using different types of porous media. In IOP Conference Series: Materials Science and Engineering, Vol. 928, No. 2, PP. 022086. IOP Publishing. https://doi.org/10.1088/1757-899x/928/2/022086
Rasheed, S. A. (2021). Enhancement in Forced Convection Heat Transfer from a Heated Triangular Cylinder by Using Porous Media. Journal of Mechanical Engineering Research and Developments, Vol. 44, No. 1, PP. 135-150.
Sabah Raad Mahdi. (2021). Experimental and Numerical Study of Convection Heat Transfer Inside a Triangular Channel Filled with Porous Media at Constant Heat Flux Boundary Condition. M.Sc. Thesis, Mechanical Engineering Department, Technology University, Baghdad, Iraq.
Layeghi, M., & Nouri-Borujerdi, A. (2006). Darcy model for the study of the fluid flow and heat transfer around a cylinder embedded in porous media. International Journal for Computational Methods in Engineering Science and Mechanics, Vol.7, No.5, PP.323-329. https://doi.org/10.1016/s0140-6701(00)94685-x
Suhad, A.H.R., (2006). Mixed Convection Heat Transfer in Saturated Porous Media Inside a Circular Tube. Ph.D. Thesis, University of Technology, Baghdad, Iraq.
Nield, D. A., & Bejan, A. (2006). Convection in porous media. Vol. 3. New York: springer. https://doi.org/10.1007/978-3-319-49562-0_1
Downloads
Key Dates
Published
Issue
Section
License
Copyright (c) 2023 Enas Khudhair, Dhamyaa Khudhur
This work is licensed under a Creative Commons Attribution 4.0 International License.