NUMERICAL SOLUTION OF DISTRIBUTIONS FOR A FLUID VELOCITY, PRESSURE AND TEMPERATURE ALONG FLOW PATH FOR A NON-CONVENTIONAL MACHINING METHOD

الملخص

This work deals with a Non-Conventional machining cell consisting of the copper tool of dimensions (30 mm width and 50 mm length and 7 mm thickness ), En8 mild steel workpiece of dimensions (30 mm width and 50 mm length and 8 mm thickness ), and fluid of (10 % NaCl w/w). The flow into the machining cell was fully developed turbulent flow. For the numerical solution, ANSYS FLUENT software was used to solve the basics equations. The inlet operating parameters for this cell was selected within the range of industrially realistic machining circumstances(supply voltage 12 to 18 volt, tool feed rate 0.35 to 1.65 mm/min, fluid flow rate 5 to 30 lit/min, fluid temperature 40 ºC and fluid back pressures 0 to 6 bar). The distributions of fluid velocity, static pressure, and temperature along the flow path were obtained. The results show the increase of fluid temperature toward the outlet flow.