Design and Manufacturing of a New Prosthetic Low Cost Pylon for Amputee

المؤلفون

  • Muhsin J. Jweeg Mechanical Engineering Department, College of Engineering, Al-Nahrain University, Baghdad, Iraq مؤلف
  • Kadhim K. Resan Material Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف
  • Muhanad N. Mohammed Mechanical Engineering Department, Al-Mustansiriyah University , Baghdad, Iraq مؤلف

الكلمات المفتاحية:

pylon، amputee ، fatigue، impact، optimim

الملخص

The Standard prosthetic pylon is manufactured from aluminum -titanium alloys as a result of lightweight. In this study, a three prosthetic pylons are designed and manufactured from different layers of composite materials (6 layers,9 layers and 12 layers ). The mechanical properties such as σy and σult and σe were measured for all types of the pylon, Also, the design pylon fatigue tester and impact pylon test then all pylons were tested by this device. All types of new prosthetic pylons are light and cheap compared with the standard pylon Therefore, to choose the best pylon, the weighted method is preferred, this method depend on practical experience. This method the optimum choice pylon (kp) , it explains that the Pylon II is good.

التنزيلات

Key Dates

منشور

2010-12-01

إصدار

مجلد 14 عدد 4 (2010): Journal of Engineering and Development

القسم

Articles

الرخصة

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

كيفية الاقتباس

Design and Manufacturing of a New Prosthetic Low Cost Pylon for Amputee. (2010). مجلة الهندسة والتنمية المستدامة, 14(4), 119-131. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1415

المؤلفات المشابهة

11-20 من 122

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.