HEAT TRANSFER INSIDE BUILDING- CLADDING SOLAR COLLECTOR

المؤلفون

  • Ahmed Mohsin Abdulmalik Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف
  • Basim Freegah Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف
  • Basima Salman Khalaf Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف
  • Mohammed H. Alhamdo Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف

DOI:

https://doi.org/10.31272/jeasd.24.4.4

الكلمات المفتاحية:

finite element، thermal energy storage، infrared thermal imaging، experiment

الملخص

In this work numerical and experimental investigation have been adopted to collect and store solar energy in exterior-wall cladding, Various improvements have been investigated inside and outside the duct to increase the efficiency of thermal heating. ANSYS software has been used to simulate current case. Results show that there is a good agreement between experimental and numerical results and this agreement increases as air velocity increases. The average percentage error for air inside duct at velocity of air 1 m/s, 3 m/s and 5 m/s is 8%, 16.5% and 5% respectively. Several vertical cooper cylinders with 12 mm diameter were added inside basin to increase the surface area. It has been found that the enhancement in temperature of air between this case and Smooth Duct, Smooth Cover base model for air velocity of 1,3and 5 m/s is 3, 4 and 11 % respectively. The effect of increasing surface area by using granular (corrugated) duct on the air temperature distribution along the duct. Have been also investigated the percentage enhancement in temperature of air between this case and previous base smooth duct case for velocities of 1, 3 and 5 m/s is 19.4, 28.6 and 16.5 % respectively. The enhancement in heat transfer when using both granular hollow sphere duct with vertical metal cylinders for air velocity of 1, 3 and 5 m/s is 27.5, 33 and 35.2 % respectively.

التنزيلات

Key Dates

منشور

2020-07-01

إصدار

مجلد 24 عدد 4 (2020): Journal of Engineering and Sustainable Development

القسم

Articles

الرخصة

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

كيفية الاقتباس

Mohsin Abdulmalik, A. ., Freegah, B., Salman Khalaf, B. ., & H. Alhamdo, M. . (2020). HEAT TRANSFER INSIDE BUILDING- CLADDING SOLAR COLLECTOR. مجلة الهندسة والتنمية المستدامة, 24(4), 26-34. https://doi.org/10.31272/jeasd.24.4.4

المؤلفات المشابهة

1-10 من 446

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.