Effect of the Application of Carbon Tetrachloride Lubricant to a Cutting Operation
Keywords:
0Abstract
In this research CCl4 as a lubricant is used for machining copper specimens. It was noticed that CCl4 has many effective effects at low machining speed, as well the effect at highspeed cutting vanished which is coincided with the results obtained by the researchers workedin this field and giving the cause of their results either for lubricant penetration loss at theinterface between the chip 0.005 m/sec, the cutting ratio (r) increases by more than 23% anddecreases to 7% at a cutting speed of 0.08 m/sec, on other hand the friction angle decreasesfrom about 37% to 11% as the cutting speed increases from 0.005 m/sec to 0.08 m/sec.
Downloads
Published
2013-10-01
Issue
Section
Articles
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY) 
How to Cite
Effect of the Application of Carbon Tetrachloride Lubricant to a Cutting Operation. (2013). Journal of Engineering and Sustainable Development, 17(4), 114-125. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/976
