THE EFFECT OF USING RUBBER TIER AND GLASS WASTE ON THE PROPERTIES OF CEMENT MORTAR

Authors

  • Mais A bdulrahman Abdulkareem Author
  • Dalia Adil Rasool Author
  • Ahmed Kamal Mahmood Author

DOI:

https://doi.org/10.31272/jeasd.2018.2.52

Keywords:

Cement mortar, Rubber tier waste, Glass waste, Compressive strength, Water absorption, Setting time, Density.

Abstract

This research studies the effect of rubber tier waste and waste glass together on the properties of cement mortar and used mixing ratio (1: 3) and has been added rubber tier waste ratio are (10%, 20%, and 30%). Has been added waste glass ratio are (10%, 20%and 30 %) and also added rubber tier waste and waste glass together ratio are (10%, 20% and 30%) by weight of the replacement of cement. This study includes mechanical properties such as compressive strength and physical properties such as water absorption, density and also setting time. The results obtained from the study that compressive strength decreases when increasing the percentage of additives of mortar .The water absorption increased when the percentage of additive is increased. The density decrease when both percentage of additive increase in mortar cement. Also, the setting time increases when the percentage of additive is increase.

Downloads

Key Dates

Published

2018-03-01

How to Cite

bdulrahman Abdulkareem, M. A., Adil Rasool, D. ., & Kamal Mahmood, A. . (2018). THE EFFECT OF USING RUBBER TIER AND GLASS WASTE ON THE PROPERTIES OF CEMENT MORTAR. Journal of Engineering and Sustainable Development, 22(2), 84-93. https://doi.org/10.31272/jeasd.2018.2.52

Similar Articles

1-10 of 808

You may also start an advanced similarity search for this article.