Stress Distributions of Lower Limb Prosthetic Socket

Authors

  • Samera K. Radi Mechanical Engineering Department, College of Engineering, Al-Mustansiriya University, Baghdad, Iraq Author

Keywords:

.

Abstract

The aim of this work is to determine the stress patterns of a prosthetic socket. This allows the socket geometry to be more accurately modeled. The analyzed socket is a medium length lower left leg.
The pressure values between the stump and the socket are taken from published data. While the loading on the socket base is evaluated theoretically. Three types of sockets, PP (5mm), PP (3mm) and a standard laminate (3mm) have used in this work.
The results showed that the stresses produced in the socket frame are low comparing with the yielded stresses of the materials. The PP (5mm) and the laminated socket show deformations below the critical value (i.e. 2mm), while the PP (3mm) gave a deformation of (2.9mm) which is higher than the critical value

Downloads

Key Dates

Published

2007-12-01

Issue

Vol. 11 No. 3 (2007): Journal of Engineering and Development

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

How to Cite

K. Radi, S. (2007). Stress Distributions of Lower Limb Prosthetic Socket. Journal of Engineering and Sustainable Development, 11(3), 22-38. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1742