INVESTIGATION OF FRICTION PRESSURE EFFECT ON WELDING QUALITY IN FRICTION STUD WELDING PROCESS
DOI:
https://doi.org/10.31272/jeasd.27.3.8Keywords:
Friction stud welding, welding quality, friction pressure, dissimilar welding, AISI304, AISI1017Abstract
The influence of friction pressure on welding quality when friction stud welding 1017 low carbon steel with AISI 304 austenitic stainless steel is investigated in this study. friction stud welding is employed in industrial applications instead of conventional welding processes Due to the friction welding process didn't need to reach the melting point of welded metals. Welding is performed on these dissimilar metals by utilizing a lathe machine with a load cell connected to a weight indicator and a manufacturing grip to fasten the plate at a rotating speed of 1600 RPM, a friction time of 20 seconds, and a friction pressure of (15, 20, and 25) MPa. After the welding procedure is completed, the specimens are subjected to tensile, torque, and hardness tests to evaluate the welding quality. In addition, optical microscope research was carried out to determine the microstructural aspects. The effect of friction pressure on welding quality was investigated based on the information generated from the results. The increase of friction pressure during the process from 15 MPa to 25 MPa leads to an increasing ultimate tensile strength from 203 MPa to 210 MPa approximately. Also, the torque values raised from 179 N.m to 198 N.m in the same case.
References
Resan K., Takhakh A., and Salman A., (2014). Effect of Friction Stir Processing (FSP) to the Mechanical Properties of 7075-T73 Aluminum Allys Plates Welded by Friction Stir Welding. Jorurnal of Engineering and Development, Vol.18, No.5.
Behrend K., Marqués J., Forster G. Jenicek A., Müller M., Cramer H, Jilg A., Soyer H., and Schein J., (2014). Stud arc welding in a magnetic field – Investigation of the influences on the arc motion. Journal of Physics: Conference Series. 550. 012003. https://doi.org/10.1088/1742-6596/550/1/012003.
Firas H. H., Sami A. N., and Muzher T. M., (2021). Study the Effect of Welding Current and Time on The Microstructure and Strength of Dissimilar Weld Joint AISI 303/AISI 1008. Diyala Journal of Engineering Sciences, Vol. 14, Issue 1, PP.67-75. https://doi.org/10.24237/djes.2021.14106.
Jones D. J. J., and Sankaranarayanan R., (2020). Friction Stud Welding –An Overview, AIP Conference Proceedings 2220, pp. 140037, India, https://doi.org/10.1063/5.0001232.
Chandima R. M., Ytterhaug H. O., Bogwald P. and Nilsen S. T. R., (2015). Underwater friction stud welding optimal parameter estimation: Engineering robust design-based approach. Journal of Offshore Mechanics and Arctic Engineering. Vol. 137, Issue 1. https://doi.org/10.1115/1.4028466.
Rajesh N., Nagaraj P., and Angela J., (2014). Ultrasonic evaluation of friction stud welded AA6063/AISI 1030 steel joints. Mater Des, Vol. 62, PP.118–123. https://doi.org/10.1016/j.matdes.2014.05.017.
Samuvel D. S., Pravin R., S. Kavin S. R., Benita B., Samuel N. D., and Nagarajan R., (2020). Process Capability & Fascinating Applications of Friction Stud welding. Materials Science and Engineering, Vol. 923, International Conference on Technological Advancements in Materials, Design, Manufacturing and Energy Sectors (ICTAMDMES’20) 20-21 February 2020, Chennai, India. https://doi.org/10.1088/1757-899X/923/1/012029.
Rajesh N., Nagaraj P., and Angela J., (2014). Investigation on joining of aluminium & mild steel by friction stud welding. Material Manufacturing Process. Vol. 27, Issue 12, PP. 1409-1413. https://doi.org/10.1080/10426914.2012.667894.
Ananthapadmanaban D., Seshagiri Rao V., Nikhil A., and Prasad K. R., (2009). A study of mechanical properties of friction welded mild steel to stainless steel joints. Materials and Design, Vol. 30, PP. 2642–2646. https://doi.org/10.1016/j.matdes.2008.10.030.
Maalekian M., (2007). Friction welding – critical assessment of literature. Science and Technology of Welding and Joining, Vol. 12, Issue 8, PP. 738-759. https://doi.org/10.1179/174329307X249333.
Sandeep R., Manu S., Sachin M., Kundra T. K., and Arshad N. S., (2018) Friction Based Additive Manufacturing Technologies. Principles for Building in Solid State, Benefits, Limitations, and Applications. USA, Ch. 3. ISBN: 9781351190862
Ihsan K., Edip C., Musa K., and Zülküf B., (2019).Investigating Microstructural Properties of 5140 Steel with 316 Stainless Steel Joined by Friction Stud Welding. 4th International Science Symposium, Kiev-Ukraine, pp. 19-24.
Jaykumar J. V., and Vishvesh J. B., (2019). Advances in Welding Technologies for Process Development. New York, Ch. 10.
Ehab N. A., Salman O., Muhaed A Mohammed ., H. A., and Abood N. A, (2018). Dissimilar Welding of AISI 309 Stainless Steel to AISI 1020 Carbon Steel Using Arc Stud Welding. ICOASE, Iraq. https://doi.org/10.1109/ICOASE.2018.8548844.
Tharmaraj R., Rajesh N. J. H., and Shenbaga P., (2020). Investigation on friction stud welded AMC/AISI 304 steel joints with ceramic intercoating. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, Issue 538. PP. 8. https://doi.org/10.1007/s40430-020-02621.
Annette B. and Carlos G., (2007) Welding Handbook. 9th ed. 2007. Miami. Vol.3, Part 2.
G. Kapil., (2020). Surface Engineering of Modern Materials. South Africa, 1st ed. 2020. Ch2..
Verma G., Sandeep K., and Bharat R. B., A Research Paper on The Comparison of Weld Strength of Friction Welding of Different Materials at Two Different RPM. 2016, International Journal of Mechanical Engineering and Technology, Vol. 7, Issue 6, pp. 123–127. ISSN: 0976-6359
Serkan B, Musa K, and Ihsan K., (2016). Friction welding of dissimilar AISI 304 and AISI 8640 steels. European Journal of Technic, vol. 6, Issue 2, pp. 79-86.
Gawhar, I. K. and Sherko A. B., (2019). Efficiency of dissimilar friction welded 1045 medium carbon steel and 316L austenitic stainless steel joints. Journal of Materials Research and Technology, Vol. 8, Issue 2, pp. 568. https://doi.org/10.1016/j.jmrt.2018.01.002.
Mohammed H. A., (2016). Microstructural and Mechanical Properties of Stud Arc Welding of Austenitic Stainless Steel Studs AISI 304 and AISI 316L to Carbon Steel AISI 1020. Thesis, The Engineering Technical College-Baghdad, Iraq. https://doi.org/10.1007/s13632-021-00744-8.
Niyanth. S., (2016). Fundamental Understanding of Bond Formation During Solid State Welding of Dissimilar Metals. Ph.D. Thesis, the University of Tennessee, Knoxville.
Anitha P., Manik C., Saravanan V. and Rajakumar S., (2018). Effects of Friction Pressure and Friction Time on the Mechanical and Microstructure Properties of Friction Welded Inconel 718 and SS410 Dissimilar Joints. Journal of Advanced Microscopy Research. Vol. 13, Issue 2, pp.211-216. https://doi.org/10.1166/jamr.2018.1381.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Mustafa Saad Kadhim, Kadhim K. Resan
This work is licensed under a Creative Commons Attribution 4.0 International License.
