Enhancement of Endurance Limit of Fiber Glass Composite Material Due to Shot Peening Process

المؤلفون

  • Ahmed Naief Al-Khazraji Machines and Equipment Engineering Department, University of Technology, Baghdad, Iraq مؤلف
  • Mahdi Noman Moslem Shareef Machines and Equipment Engineering Department, University of Technology, Baghdad, Iraq مؤلف

الكلمات المفتاحية:

Composite Materials، Endurance Limit، Fatigue، Fiber Glass، Shot Peening

الملخص

Shot peening is one of the common cold working processes that used to improve the fatigue life of the metals. But, studying the effect of this process on the variation in properties of composite material is still insufficient. This work was investigated the effect of shot peening with three different times of 2 min, 4 min and 6 min experimentally on fiber glass (E type) with polyester with constant volume fraction of 33 %. The results showed that the best improvement obtained in the endurance limit was at 6 min shot peening time with a percentage of 25 % more than that of without shot peening. While the improvement in mechanical properties (ultimate stress) was obtained by 5 % at shot peening time of 6 min. The verification of experimental results was done using ANSYS.14 workbench with a percentage of error not exceed 4.68 % in behavior between the experimental and numerical where the maximum error does not exceed 5%.

 

التنزيلات

Key Dates

منشور

2015-03-01

إصدار

مجلد 19 عدد 2 (2015): Journal of Engineering and Development

القسم

Articles

الرخصة

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

كيفية الاقتباس

Enhancement of Endurance Limit of Fiber Glass Composite Material Due to Shot Peening Process. (2015). مجلة الهندسة والتنمية المستدامة, 19(2), 141-153. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/811

المؤلفات المشابهة

1-10 من 357

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.