CHARACTERIZATION OF SAGO PALM-CARBON FIBRE REINFORCED EPOXY HYBRID COMPOSITES

المؤلفون

  • Safinaz Binti Saad Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia مؤلف
  • Suhad D. Salman Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف https://orcid.org/0000-0001-6091-8145
  • Zulkiflle Leman Advanced Engineering Materials and Composites Research Centre, Faculty of Engineering, 43400 Universiti Putra Malaysia مؤلف
  • Munir Faraj Alkbir Facilities Maintenance Engineering, UniKL Malaysian Institute of Industrial Technology (MITEC), Persiaran Sinaran Ilmu, Bandar Seri Alam, 81750 Masai, Johor Darul Takzim, Malaysia مؤلف

DOI:

https://doi.org/10.31272/jeasd.26.6.3

الكلمات المفتاحية:

Sago palm fiber، carbon fiber، hybrid composites، mechanical properties

الملخص

الألياف الطبيعية هي بدائل للألياف الاصطناعية. نخيل الساغو هو نوع جديد من الألياف الطبيعية وله نفس المواصفات مثل الألياف الطبيعية الموجودة الأخرى. في هذه الدراسة تمت دراسة الخواص الميكانيكية لألياف النخيل الكربونية المقواة بمركبات الايبوكسي. تم إجراء اختبارات التأثير لدراسة الخواص الميكانيكية لمركبات الإيبوكسي الهجينة المقواة بألياف النخيل والكربون. تحتوي المركبات الهجينة على ألياف نخيل ساغو منسوجة وألياف كربونية معززة براتنج الإيبوكسي يتم إنتاجها بطريقة vacuum)  (compaction. تم تحضير كل عينة بأجزاء حجم مختلفة مثل 40٪، 64٪ و91٪ من ألياف نخيل الساغو. بعد تحضير المادة المركبة، تمت دراسة اختبارات الخواص الميكانيكية على العينة المعدة. بالإضافة إلى ذلك، باستخدام اختبارات المسح بالمجهر الإلكتروني، تم تحليل وضع الفشل.

المراجع

Faruk, O., Bledzki, A. K., Fink, H. P., and Sain, M. (2012). "Biocomposites reinforced with natural fibers: 2000–2010," Progress in Polymer Science 37(11), 1552-1596. https://doi.org/10.1016/j.progpolymsci.2012.04.003

Dawood Salman, S. (2022). Experimental Measurements of the Mechanical Behavior of the Composite Materials and Hybrid Materials Subject to Tensile Test. Journal of Engineering and Sustainable Development, 17(1), 162–170. Retrieved from https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1100

Mohammed H. Khalaf, Suhad D. Salman. (2021). APPARATUS AND METHOD FOR CALCULATING PENETRATION FORCE BY DROP WEIGHT IMPACT TECHNIQUE. Journal of Engineering and Sustainable Development, 2nd online Scientific conference for Graduate Engineering Students June 2021. https://doi.org/10.31272/jeasd.conf.2.2.2

Salman, S.D." Partial replacement of synthetic fibres by natural fibres in hybrid composites and its effect on monotonic properties" Journal of Industrial Textiles, 2021, 51(2), pp. 258–276. https://doi.org/10.1177/1528083719878843

Gyanaranjan M., Chaitanya P.B., (2009) “Characterization of Hybrid FRP Composites with Hygrothermal Exposure under Varied Ambient Conditions”. National Institute of Technology Rourkela pp. 20-21 Retriveed from http://ethesis.nitrkl.ac.in/175/1/GYANA

Haruna V.N., Abdulrahman A.S., Zubairu P.T., Isezuo L.O., Abdulrahman M.A., Onuoha D.C., (2014) “Prospects And Challenges Of Composites In A Developing Country”, ARPN Journal of Engineering and Applied Sciences, 9 (7), 1819-6608

Salman, S.D. "Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications" Defence Technology, 2020, 16(6), pp. 1098–1105. https://doi.org/10.1016/j.dt.2019.11.013

Salman, S.D."The influence of kenaf contents and stacking sequence on drop-weight impact properties of hybrid laminated composites reinforced polyvinyl butyral composites" 2020 Journal of Industrial Textiles. https://doi.org/10.1177/1528083720937388

Introduction of Fibre-Reinforced Polymers − Polymers and Composites: Concepts, Properties and Processes (2013) Retrieved from http://cdn.intechopen.com/pdfs-wm/41941.

Sgriccia, N., Hawley, M. C., and Misra, M. (2008). "Characterization of natural fiber surfaces and natural fiber composites," Composites Part A: Applied Science and Manufacturing 39(10), 1632-1637.

https://doi.org/10.1016/j.compositesa.2008.07.007

Sutrisno, W.; Rahayu, M.; Adhika, D.R. Thermal Properties of Sago Fiber-Epoxy Composite. Fibers 2020, 8, 4.

https://doi.org/10.3390/fib8010004

Supu, I.; Jaya, I. Synthesis and Compression Strength Properties of Composite Based on Sago Pulp FiberWaste. IOP Conf. Earth Environ. Sci. 2018,187, 1–6.

Mardin, H. & Wardana, I. & Pratikto, & Suprapto, Wahyono & Kamil, Kusno. (2016). Effect of Sugar Palm Fiber Surface on Interfacial Bonding with Natural Sago Matrix. Advances in Materials Science and Engineering. 2016. 1-5.

https://doi.org/10.1155/2016/9240416.

El-Shekeil, Y. A., Sapuan, S. M., Abdan, K., and Zainudin, E. S. (2012). "Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites," Materials and Design 40, 299-303. https://doi.org/10.1016/j.matdes.2012.04.003

El-Shekeil, Y. A., Sapuan, S. M., and Algrafi, M. W. (2014). "Effect of fiber loading on mechanical and morphological properties of cocoa pod husk fibers reinforced thermoplastic polyurethane composites," Materials and Design 64, 330-333. https://doi.org/10.1016/j.matdes.2014.07.034

Saba, N., Jawaid, M., Hakeem, K. R., Paridah, M. T., Khalina, A., and Alothman, O. Y. (2015( Potential of bioenergy production from industrial kenaf (Hibiscus cannabinus L.) based on Malaysian perspective," Renewable and Sustainable Energy Reviews 42, 446-459. https://doi.org/10.1016/j.rser.2014.10.029

Sapuan, S. M., Leenie, A., Harimi, M., and Beng, Y. K. (2006). "Mechanical properties of woven banana fibre reinforced epoxy composites," Materials and Design 27(8), 689-693. https://doi.org/10.1016/j.matdes.2004.12.016

التنزيلات

Key Dates

منشور

2022-11-04

إصدار

مجلد 26 عدد 6 (2022): Journal of Engineering and Sustainable Development

القسم

Articles

الرخصة

الحقوق الفكرية (c) 2022 Safinaz Binti Saad, Suhad D. Salman, Zulkiflle Leman, Munir Faraj Alkbir

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

كيفية الاقتباس

CHARACTERIZATION OF SAGO PALM-CARBON FIBRE REINFORCED EPOXY HYBRID COMPOSITES. (2022). مجلة الهندسة والتنمية المستدامة, 26(6), 23-29. https://doi.org/10.31272/jeasd.26.6.3

المؤلفات المشابهة

21-30 من 578

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.