DETERMINATION OF FRACTURE CHARACTERISTICS FOR LOCAL RIGID PAVEMENT MATERIALS IN IRAQ

Authors

  • Zainab Ahmed Alkaissi Highway & Transportation Engineering Department, Al-Mustansiriayah University, Baghdad, Iraq Author
  • Abdulhaq Hadi Ali Highway & Transportation Engineering Department, Al-Mustansiriayah University, Baghdad, Iraq Author
  • Ahmed Abd Ameer Highway & Transportation Engineering Department, Al-Mustansiriayah University, Baghdad, Iraq Author

Keywords:

rigid pavement, three point bending test, stress intensity factors, fracture toughness, J-integral, fracture energy

Abstract

This paper presents an experimental method using (TPBT) Three Point Bending Test to identify fracture parameters and performance of concrete rigid pavements such as (KI, KIC, J-Integral and GF). To achieve these objectives and to conduct the experimental part of this study, two concrete mixtures developed (Mix No.1 and Mix No.2) from local available materials are used which include: Iraqi Portland cement (Tasloja) resistant to sulphates, coarse aggregate gradation with a maximum sizes of (25) mm for Mix No.1 according to AASHTO M 43, Size No. 67grade type and maximum size of (19) mm, river sand as a fine aggregate, and water.12 concrete beam specimens are subjected to two loading rates (0.45kN/s and 0.75kN/s) to reflect the interaction with different traffic loading and different crack depths (0,15%,30%) of specimen depths are used to simulate the initial crack depth in rigid pavement. Experimental results show that, the maximum loading for fracture increased with the increased in loading rate for (Mix No.1) and (Mix No.2). The deflection for No.1 presents higher deflection results than Mix No.2 and these results give an indication that (Mix No.1) is more flexible than Mix No.2 under different loading rates and other conditions. The results show that, maximum load at failure and deflection decrease with the increase in notch depth. 

 

Downloads

Key Dates

Published

2017-03-01

How to Cite

Ahmed Alkaissi, Z. ., Hadi Ali, A. ., & Abd Ameer, A. . (2017). DETERMINATION OF FRACTURE CHARACTERISTICS FOR LOCAL RIGID PAVEMENT MATERIALS IN IRAQ. Journal of Engineering and Sustainable Development, 21(2), 228-245. https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/622

Similar Articles

11-20 of 587

You may also start an advanced similarity search for this article.