DUAL-BAND RECONFIGURABLE MIMO ANTENNA FOR WIRELESS APPLICATIONS

Authors

  • Abdullah A. Jabber Electrical Engineering Department, Mustansiriyah University, Baghdad, Iraq Author
  • Raad H. Thaher Electrical Engineering Department, Mustansiriyah University, Baghdad, Iraq Author

DOI:

https://doi.org/10.31272/jeasd.25.3.1

Keywords:

MIMO, Reconfigurable antenna, PIN diode, WiMAX, LTE

Abstract

This article presents design and simulation of a new compact four-element dual-band MIMO frequency reconfigurable antenna that can be reconfigured for WiMAX and LTE applications. The antenna includes four elements at the same FR4 substrate with an optimized overall size of 65x65x1.6 mm3 and an optimized partial GND plane of 30x11.125 mm2. The reconfiguration rate is between 2.41 and 3.99 GHz that can cover the WiMAX and LTE wireless devices by applying just one RF (PIN) switch to change the operating frequency. The antenna operates on the two states of the PIN diode under its two states ON and OFF with (2.7 GHz, and 2.8 GHz) resonant frequencies respectively. The proposed antenna produces acceptable simulation results for the MIMO system by achieving gain from (3-7.2) dBi, less than -14.5 dB coupling effect, less than 0.28 envelope correlation coefficient, and diversity gain range from 8.4-10.

Downloads

Published

2021-05-01

How to Cite

DUAL-BAND RECONFIGURABLE MIMO ANTENNA FOR WIRELESS APPLICATIONS. (2021). Journal of Engineering and Sustainable Development, 25(3), 1-9. https://doi.org/10.31272/jeasd.25.3.1

Similar Articles

1-10 of 108

You may also start an advanced similarity search for this article.