Experimental and Numerical Analysis of Vinyl Ester Composites Reinforced with Coconut and Glass
DOI:
https://doi.org/10.31272/jeasd.3644Keywords:
Coconut and Glass Waste, Mechanical Tests, Microstructure Examination, Simulation Analysis, Statistical Analysis, Vinyl Ester CompositesAbstract
Vinyl ester composites reinforced with treated coconut (shells and fibers) and glass (powder and fibers) have been investigated using numerical, experimental, and statistical methods. Tensile and bending tests were applied. Numerical simulation was conducted using the Finite Element Method (FEM) with the ABAQUS CAE 2019 program for tensile and flexural samples. Experimental values were analyzed using the statistical analysis from the Minitab Statistical Software 2022 program. The simulation results illustrate the great convergence between numerical and experimental values. By analyzing the experimental results, the 30% and 40% filler ratios prevailed in all the vinyl ester composites reinforced with coconut and glass. The strength values obtained from the simulation did not exceed the experimental laboratory values by more than 5% in the tensile test and 10.6% in the bending test. Additionally, scanning electron microscopy (SEM) has demonstrated improved adhesion in synthetic fiber, displaying holes formed by the removal and pulling of fibers and particles from the polymer. The mechanical properties of these composites encourage their further study, as they can be used in many structural industries.
References
A. Windyandari, O. Kurdi, Sulardjaka, and M. Tauviqirrahman, “Bow structure damage analysis for hybrid coir-glass fiber composite fishing boat hull subjected to front collision load,” Curved and Layered Structures, vol. 9, no. 1, pp. 236–257, 2022. doi: https://doi.org/10.1515/cls-2022-0020.
M. N. Hussain, C. S. Basha, and P. Naresh, “Modelling And Static Structural Analysis Of Coconut Fiber Reinforced Polyester Composite Leaf Spring Using Finite Element Method,” International Journal of Research in Engineering and Science, vol. 10, no. 6, pp. 1106–1120, 2022. [Online]. Available: https://www.ijres.org/papers/Volume-10/Issue-6/100611061120.pdf.
S. P. Jani, A. S. Kumar, A. Adamkhan, Nithin, and Rajakumar, “Effect of coconut fillers on hybrid coconut Kevlar fiber reinforced epoxy composites,” Carbon – Science and Technology, vol. 7, no. 4, pp. 50–58, 2015. [Online]. Available: https://www.applied-science-innovations.com/cst-web-site/CST-7-4-2015/CST-162-7-4-2015-50-58.pdf.
C. W. Kai, A. H. Abdullah, and S. Debnath, “Mechanical properties of hybrid polymer composite using natural fiber and nanoparticle,” IOP Conference Series: Materials Science and Engineering, vol. 495, no. 1, Art. no. 012095, 2019. doi: https://doi.org/10.1088/1757-899X/495/1/012095.
D. A. Ekpechi, O. O. Obiukwu, E. I. Nwankwo, and V. C. Okpalaku-Nath, “Experimental study of the thermal and mechanical properties of epoxy-reinforced composites,” Journal of Applied Physical Science International, vol. 15, no. 1, pp. 6–16, Apr. 2023. doi: https://doi.org/10.56557/japsi/2023/v15i18192.
R. D. Hemanth, M. S. Kumar, A. Gopinath, and L. Natrayan, “Evaluation of mechanical properties of E-glass and coconut fiber reinforced with polyester and epoxy resin matrices,” International Journal of Mechanical and Production Engineering Research and Development, vol. 7, no. 5, pp. 13–20, 2017. Available: https://kompozit.org.tr/wp-content/uploads/2020/10/EVALUATION_OF_MECHANICAL_PROPERTIES_OF_E.pdf
J. E. R. Dhas and P. Pradeep, “Mechanical property evaluation of palm/glass sandwiched fiber reinforced polymer composite in comparison with few natural composites,” IOP Conference Series: Materials Science and Engineering, vol. 247, no. 1, Art. no. 012010, 2017. doi: https://doi.org/10.1088/1757-899X/247/1/012010.
M. A. Rahman, R. Monish, and P. M. Kiran Kumar, “Mechanical investigation of epoxy glass and coconut coir fiber composite,” International Journal for Research & Development in Technology, vol. 7, no. 4, pp. 869–877, Apr. 2017. [Online]. Available: https://www.ijrdt.org/upload/57064174-Mechanical%20Investigation%20Of%20Epoxy%20Glass%20And%20Coconut%20coir%20Fiber%20Composite.pdf
M. Mittal and R. Chaudhary, “Development of PALF/Glass and COIR/Glass fiber reinforced hybrid epoxy composites,” Journal of Materials Science & Surface Engineering, vol. 6, no. 5, pp. 851–861, 2018. [Online]. Available: https://www.jmsse.in/files/651_Mittal_et_al.pdf.
I. Mawardi, J.Hanif, and Nurdin, “Development of a hybrid coconut fibre and multi reinforcement epoxy composite for high impact strength,” IOP Conference Series: Materials Science and Engineering, vol. 536, no. 1, Art. no. 012013, 2019. doi: https://doi.org/10.1088/1757-899X/536/1/012013.
T. Livingston, A. Athijayamani, and A. Alavudeen, “Evaluation of mechanical properties of coconut shell particle/vinyl ester composite based on the untreated and treated conditions,” Mater Res Express, vol. 8, Art. no. 035309, Mar. 2021. doi: https://doi.org/10.1088/2053-1591/ab9d52.
S. Navaneethakrishnan, V. Sivabharathi, and S. Ashokraj, “Weibull distribution analysis of roselle and coconut-shell reinforced vinylester composites,” Australian Journal of Mechanical Engineering, vol. 19, no. 4, pp. 457–466, 2021. doi: https://doi.org/10.1080/14484846.2019.1637089.
S. Girish, B. Vijaya, S. Arjun, and S. Raghavendra, “Manufacturing and mechanical characterization of coir fibre composites based on vinyl ester,” Advances in Materials and Processing Technologies, vol. 8, no. 2, pp. 1997–2006, 2022. doi: https://doi.org/10.1080/2374068X.2021.1878711.
R. Unal and E. B. Dean, “Taguchi approach to design optimization for quality and cost: An overview,” presented at the 1991 Annual Conference of the International Society of Parametric Analysts, 1991. [Online]. Available: https://ntrs.nasa.gov/api/citations/20040121019/downloads/20040121019.pdf.
Dassault Systèmes Simulia Corp., Abaqus/CAE User’s Manual, ver. 6.11. Providence, RI, USA, 2011. [Online]. Available: https://abaqusdocs.eait.uq.edu.au/v6.11/books/usi/default.htm.
D. A. A.-K. Foud and S. D. Salman, “Void content and moisture absorption behavior of hybrid vinyl ester composites reinforced with different forms of coconut shells and glass,” Journal of Industrial Textiles, vol. 55, pp. 1–35, 2025. doi: https://doi.org/10.1177/15280837251327085.
A. R. Ngah, S. D. Salman, Z. Leman, S. M. Sapuan, M. F. M. Alkbir, and F. Januddi, “Effects of drilling parameters on delamination of kenaf-glass fibre reinforced unsaturated polyester composites,” Journal of Industrial Textiles, vol. 51, no. 2_suppl, pp. 3057S–3076S, 2022. doi: https://doi.org/10.1177/15280837211062053.
D. C. R. Velasco, F. P. D. Lopes, D. Souza, H. A. C. Lopera, S. N. Monteiro, and C. M. F. Vieira, “Evaluation of Composites Reinforced by Processed and Unprocessed Coconut Husk Powder,” Polymers, vol. 15, Art. no. 1195, Feb. 2023. doi: https://doi.org/10.3390/polym15051195.
B. Bakri, S. Chandrabakty, and Naharuddin, “Influence of Alkali and Microwave Treatments of Fiber on the Water Absorption and the Mechanical Properties of Coir Fiber/Polyester Composites,” The 1st International Conference on Materials Engineering and Management-Engineering Section, pp. 32–36, Mar. 2019. doi: https://doi.org/10.2991/icmeme-18.2019.8.
I. Renreng, B. Bakri, S. Chandrabakty, and Naharuddin, “Evaluation of mechanical and physical properties of pressed coir fiber/epoxy composite with NaOH and microwave treatment of fiber,” Journal of Renewable Materials, vol. 9, no. 2, pp. 325–335, 2021. doi: https://doi.org/10.32604/jrm.2021.012774.
Downloads
Key Dates
Received
Revised
Accepted
Published Online First
Published
Issue
Section
License
Copyright (c) 2026 Duaa Abd Al-Kadhem Foud, Suhad Dawood Salman, Zulkiflle Leman, Munir Faraj Alkbir (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
