Arduino-Based Electromyography System for Enhanced Monitoring and Optimisation of Oil Palm Harvesting Manual Workers

Authors

  • Mohd Rizal Ahmad Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang,  Malaysia Author https://orcid.org/0000-0002-3046-6691
  • Nabilah Kamaliah Mustaffa Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang,  Malaysia Author https://orcid.org/0009-0006-7985-7905
  • Ahmad Syazwan Ramli Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Malaysia Author https://orcid.org/0000-0001-7684-5315
  • Muhamad Izzat Fahmi Osman Tohpaeroh Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Malaysia Author https://orcid.org/0009-0005-1845-8401
  • Dr. Mohd Azwan Mohd Bakri Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Malaysia Author https://orcid.org/0000-0002-6548-2210

DOI:

https://doi.org/10.31272/jeasd.28.6.4

Keywords:

Arduino, Electromyography, Harvesting, Muscle activity, Oil palm

Abstract

Significant changes have been made in the harvesting operations implemented within the oil palm industry. Mechanisation has replaced conventional manual harvesting methods, which are physically intensive work, leading to increased effectiveness. However, despite the known association of manual labour with musculoskeletal problems among workers, it remains crucial in harvesting operations. Electromyography (EMG) has emerged as an essential tool for monitoring muscle activities. This paper aimed to develop an Arduino-based EMG system for muscle activity monitoring in oil palm harvesters as a cost-effective and user-friendly method. The results showed that there was a direct correlation between recorded values and lifted loads, whereby 8kg had the highest reading while 2kg had the lowest reading. It reflects some positive trends in mean values in the weight categories found in the dataset, specifically 0.4238 for 2kg, 0.5078 for 4kg, and 0.7937 for 8kg. Similarly, standard deviations showed an increasing pattern with an increase in weight, indicating a trend for more variation at higher weights. The prototype demonstrated promising results regarding capturing muscle activities under various scenarios, which indicate its potential to assist in designing and developing ergonomically improved machines. Further research needs to be conducted to test the accuracy.

Author Biographies

  • Mohd Rizal Ahmad, Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang,  Malaysia

    Engineering Processing Research Division

    Research Officer

  • Nabilah Kamaliah Mustaffa, Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang,  Malaysia

    Engineering Processing Research Division

    Research Officer


  • Ahmad Syazwan Ramli, Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Malaysia

    Engineering Processing Research Division

    Research Officer


  • Muhamad Izzat Fahmi Osman Tohpaeroh, Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Malaysia

    Engineering Processing Research Division

    Assistant Research Officer

  • Dr. Mohd Azwan Mohd Bakri, Engineering Processing Research Division, Malaysian Palm Oil Board, No. 6, Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Malaysia

    Engineering Processing Research Division

    Research Officer

References

T. Raj, F. H. Hashim, A. B. Huddin, A. Hussain, M. F. Ibrahim, and P. M. Abdul, “Classification of oil palm fresh fruit maturity based on carotene content from Raman spectra,” Sci Rep, vol. 11, no. 1, p. 18315, Sep. 2021, doi: https://doi.org/10.1038/s41598-021-97857-5.

H.-H. Tao, E. M. Slade, K. J. Willis, J.-P. Caliman, and J. L. Snaddon, “Effects of soil management practices on soil fauna feeding activity in an Indonesian oil palm plantation,” Agric Ecosyst Environ, vol. 218, pp. 133–140, Feb. 2016, doi: https://doi.org/10.1016/j.agee.2015.11.012.

N. Myzabella, L. Fritschi, N. Merdith, S. El-Zaemey, H. Chih, and A. Reid, “Occupational Health and Safety in the Palm Oil Industry: A Systematic Review,” Int J Occup Environ Med, vol. 10, no. 4, pp. 159–173, Oct. 2019, doi: https://doi.org/10.15171/ijoem.2019.1576.

Y. G. Ng, S. B. M. Tamrin, W. M. Yik, I. S. M. Yussof, and I. Mori, “The Prevalence of Musculoskeletal Disorder and Association with Productivity Loss: A Preliminary Study among Labour Intensive Manual Harvesting Activities in Oil Palm Plantation,” Ind Health, vol. 52, no. 1, pp. 78–85, 2014, doi: https://doi.org/10.2486/indhealth.2013-0017.

M. Ahmed, M. Grillo, A. Taebi, M. Kaya, and P. Thibbotuwawa Gamage, “A Comprehensive Analysis of Trapezius Muscle EMG Activity in Relation to Stress and Meditation,” BioMedInformatics, vol. 4, no. 2, pp. 1047–1058, Apr. 2024, doi: https://doi.org/10.3390/biomedinformatics4020058.

D. H. Muhsen, A. B. Ghazali, T. Khatib, and I. A. Abed, “Extraction of Photovoltaic Module Model’s Parameters Using an Improved Hybrid Differential evolution/electromagnetism-like Algorithm,” Solar Energy, vol. 119, pp. 286–297, Sep. 2015, doi: https://doi.org/10.1016/j.solener.2015.07.008.

A. Phinyomark, R. N. Khushaba, and E. Scheme, “Feature Extraction and Selection for Myoelectric Control Based on Wearable EMG Sensors,” Sensors, vol. 18, no. 5, p. 1615, May 2018, doi: https://doi.org/10.3390/s18051615.

R. Nemes et al., “Ipsilateral and Simultaneous Comparison of Responses from Acceleromyography- and Electromyography-based Neuromuscular Monitors,” Anesthesiology, vol. 135, no. 4, pp. 597–611, Oct. 2021, doi: https://doi.org/10.1097/ALN.0000000000003896.

T. Yu, K. Akhmadeev, E. Le Carpentier, Y. Aoustin, and D. Farina, “Highly Accurate Real-Time Decomposition of Single Channel Intramuscular EMG,” IEEE Trans Biomed Eng, vol. 69, no. 2, pp. 746–757, Feb. 2022, doi: https://doi.org/10.1109/TBME.2021.3104621.

N. Nazmi, M. Abdul Rahman, S.-I. Yamamoto, S. Ahmad, H. Zamzuri, and S. Mazlan, “A Review of Classification Techniques of EMG Signals during Isotonic and Isometric Contractions,” Sensors, vol. 16, no. 8, p. 1304, Aug. 2016, doi: https://doi.org/10.3390/s16081304.

R. Chowdhury, M. Reaz, M. Ali, A. Bakar, K. Chellappan, and T. Chang, “Surface Electromyography Signal Processing and Classification Techniques,” Sensors, vol. 13, no. 9, pp. 12431–12466, Sep. 2013, doi: https://doi.org/10.3390/s130912431.

S. Fuentes del Toro, Y. Wei, E. Olmeda, L. Ren, W. Guowu, and V. Díaz, “Validation of a Low-Cost Electromyography (EMG) System via a Commercial and Accurate EMG Device: Pilot Study,” Sensors, vol. 19, no. 23, p. 5214, Nov. 2019, doi https://doi.org/10.3390/s19235214.

J. Nsaif Shehab, “DESIGN AND IMPLEMENTATION OF FACTORY SECURITY SYSTEM,” Journal of Engineering and Sustainable Development, vol. 2018, no. 01, pp. 162–171, Jan. 2018, doi: https://doi.org/10.31272/jeasd.2018.1.13.

R. T. H. Abbas Saleh Hassan, “SIMULATION OF RADIO FREQUENCY IDENTIFICATION BASED LIBRARY MANAGEMENT SYSTEM,” Journal of Engineering and Sustainable Development, vol. 21, no. 4, pp. 161–170, Jul. 2017, [Online]. Available: https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/512

G. Ehrmann, T. Blachowicz, S. V. Homburg, and A. Ehrmann, “Measuring Biosignals with Single Circuit Boards,” Bioengineering, vol. 9, no. 2, p. 84, Feb. 2022, doi: https://doi.org/10.3390/bioengineering9020084.

S. Zhao et al., “Wearable Physiological Monitoring System Based on Electrocardiography and Electromyography for Upper Limb Rehabilitation Training,” Sensors, vol. 20, no. 17, p. 4861, Aug. 2020, doi: https://doi.org/10.3390/s20174861.

H. Wu, M. Dyson, and K. Nazarpour, “Arduino-Based Myoelectric Control: Towards Longitudinal Study of Prosthesis Use,” Sensors, vol. 21, no. 3, p. 763, Jan. 2021, doi: https://doi.org/10.3390/s21030763.

S. Fuentes del Toro, Y. Wei, E. Olmeda, L. Ren, W. Guowu, and V. Díaz, “Validation of a Low-Cost Electromyography (EMG) System via a Commercial and Accurate EMG Device: Pilot Study,” Sensors, vol. 19, no. 23, p. 5214, Nov. 2019, doi https://doi.org/10.3390/s19235214.

O. J. Suarez, N. H. Díaz, and A. P. Garcia, “A real-time pattern recognition module via Matlab-Arduino interface,” in Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, Latin American and Caribbean Consortium of Engineering Institutions, 2020. doi: https://doi.org/10.18687/LACCEI2020.1.1.646.

Y. S. A. Gumilang, K. Krisdianto, H. Haitsam, Moch. A. R. Fahreza, and A. Alfayid, “Design of Bluetooth Wireless Transporter Mecanum Wheeled Robot with Android Smartphone Controller for Moving Item,” ELKHA, vol. 15, no. 1, p. 61, Apr. 2023, doi https://doi.org/10.26418/elkha.v15i1.63769.

R. Maulana Hidayat, E. Hadi Purwanto, and A. E. Kristus Pramuko, “Prototype Of Wheel Suggestion Control Using Android Based On Arduino Uno R3,” Jurnal Inovatif : Inovasi Teknologi Informasi dan Informatika, vol. 5, no. 2, p. 129, Oct. 2022, doi: https://doi.org/10.32832/inova-tif.v5i2.8509.

G. M. U. Ghori and R. G. Luckwill, “Responses of the lower limb to load carrying in walking man,” Eur J Appl Physiol Occup Physiol, vol. 54, no. 2, pp. 145–150, Aug. 1985, doi: https://doi.org/10.1007/BF02335921.

O. Thamsuwan and P. W. Johnson, “Machine learning methods for electromyography error detection in field research: An application in full-shift field assessment of shoulder muscle activity in apple harvesting workers,” Appl Ergon, vol. 98, p. 103607, Jan. 2022, doi: https://doi.org/10.1016/j.apergo.2021.103607.

Downloads

Key Dates

Received

2024-05-30

Revised

2024-09-28

Accepted

2024-09-30

Published Online First

2024-11-01

Published

2024-11-01

How to Cite

Ahmad, M. R., Mustaffa, N. K. ., Ramli, A. S. ., Osman Tohpaeroh, M. I. F. ., & Mohd Bakri, M. A. . (2024). Arduino-Based Electromyography System for Enhanced Monitoring and Optimisation of Oil Palm Harvesting Manual Workers. Journal of Engineering and Sustainable Development, 28(6), 717-721. https://doi.org/10.31272/jeasd.28.6.4

Similar Articles

1-10 of 126

You may also start an advanced similarity search for this article.