PROTECTION LOW CARBON STEEL FROM CORROSION USING COATING PROCESS
DOI:
https://doi.org/10.31272/jeasd.24.3.4Keywords:
carbon steel, corrosion resistance, coatingAbstract
In this research work, samples of low carbon steel AISI 1017 subjected to shot peening process for 15 minutes. These samples were cleaned and coated with epoxy. The coating process were carried out with epoxy, epoxy mixed with alumina powder, epoxy mixed with silicon carbide powder and the last case, the steel coated with epoxy mixed with alumina and silicon carbide powders. Results showed that the corrosion resistance of steel coated with epoxy and alumina were better as compared with other samples .
Downloads
Published
2020-05-01
Issue
Section
Articles
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY) 
How to Cite
PROTECTION LOW CARBON STEEL FROM CORROSION USING COATING PROCESS. (2020). Journal of Engineering and Sustainable Development, 24(3), 58-66. https://doi.org/10.31272/jeasd.24.3.4
