Performance Assessments of Direct Contact Serpentine Tube Based Photovoltaic Thermal Module: An Experimental Comparison

Authors

DOI:

https://doi.org/10.31272/jeasd.28.4.6

Keywords:

Cell Temperature, Electrical Productivity, Serpentine Tube, Thermal Performance, Water-Cooled Photovoltaic Thermal

Abstract

Solar energy is the most focused in the field of renewable energy. It is a clean, green, environmentally friendly energy source. One of the modern technologies utilized by researchers to investigate the wasted heat by the photovoltaic module is the photovoltaic thermal collector, which simultaneously provides thermal and electrical power for various engineering applications. This study presented a new configuration of a water-cooled photovoltaic thermal module that utilizes a copper serpentine tube attached directly using thermal silicon to the poly-crystalline PV module for water circulation. The created PV/T was well-insulated using fiber material, insulation cork, and Wooden parts. The water flow was circulated via a DC pump with low power consumption. The fabricated unit was compared to the standalone photovoltaic module for the performance evaluation. The main result showed a significant enhancement in the electrical productivity of the photovoltaic thermal module compared to the standalone unit. The cell temperature was reduced by 13.3% compared to the standalone photovoltaic module. Accordingly, the water-based PV/T module effectively eliminated the heat dissipated to the surrounding region by the PV module by using a serpentine tube, assuring sustainable contribution.

References

A. Alshibil, I. Farkasand P. Víg, “Sustainability contribution of hybrid solar collector towards net-zero energy buildings concerning solar cells wasted heat”, vol. 74, pp. 185–195, Jun. 2023. https://doi.org/10.1016/j.esd.2023.04.001.

M. Yousif and M. Kassim, “Cooling of Concentrated Photovoltaics With Phase Change Material and Fins”, vol. 27, no. 5, pp. 615–629, Jun. 2023.https://doi.org/10.31272/jeasd.27.5.5.

S. Hussein and M. Nima, “Numerical and Experimental Investigation of Semicircular Solar Updraft Tower System Employing Porous Copper Metal Foam”, vol. 27, no. 5, pp. 596–614, Jun. 2023.. https://doi.org/10.31272/jeasd.27.5.4.

A. Alshibil, I. Farkasand P. Víg, “Thermodynamical analysis and evaluation of louver-fins based hybrid bi-fluid photovoltaic/thermal collector systems”, vol. 206, pp. 1120–1131, Jun. 2023. https://doi.org/10.1016/j.renene.2023.02.105.

M. Wolf, “Performance analyses of combined heating and photovoltaic power systems for residences”, vol. 16, no. 1–2, pp. 79–90, Jun. 1976.. https://doi.org/10.1016/0013-7480(76)90018-8.

T. Sathe and A. Dhoble, “A review on recent advancements in photovoltaic thermal techniques”, vol. 76, pp. 645–672, Jun. 2017. https://doi.org/10.1016/j.rser.2017.03.075.

A. Herez, H. El, T. Lemenandand M. Ramadan, “Review on photovoltaic/thermal hybrid solar collectors : Classifications, applications, and new systems”, vol. 207, pp. 1321–1347, Jun. 2020. https://doi.org/10.1016/j.solener.2020.07.062.

Y. Chaibi, T. El Rhafikiand R. Simón-Allué, “Air-based hybrid photovoltaic/thermal systems: A review”, vol. 295, p. 126211, Jun. 2021. https://doi.org/10.1016/j.jclepro.2021.126211.

K. Bilen and İ. Erdoğan, “Effects of cooling on performance of photovoltaic/thermal (PV/T) solar panels: A comprehensive review”, vol. 262, no. January, p. 111829, Jun. 2023. https://doi.org/10.1016/j.solener.2023.111829.

P. Holman, “Experimental Methods for Engineers”, vol. Eighth, Jun. 2012.

S. Yoon, J. Seo, M. Choiand B. Lee, “Enhanced photovoltaic efficiency through radiative cooling augmented by a thermosyphon effect”, vol. 268, no. August, p. 116046, Jun. 2022. https://doi.org/10.1016/j.enconman.2022.116046.

A. Khudadad, F. Salehand N. Kasim, “Photovoltaic/Thermal (PV/T) System Direct Contact Type: a Review”, vol. 26, no. 5, pp. 53–67, Jun. 2022. https://doi.org/10.31272/jeasd.26.5.5.

A. Ibrahim, M. Othmanand M. Ruslan, “Performance of photovoltaic thermal collector (PVT) with different absorbers design”, vol. 5, no. 3, pp. 321–330, Jun. 2009.

P. Dupeyrat, C. Menezo, M. Rommeland H. Henning, “Efficient single glazed flat plate photovoltaic–thermal hybrid collector for domestic hot water systems”, vol. 85, pp. 1457–1468, Jun. 2011. https://doi.org/10.1016/j.solener.2011.04.002.

A. Khelifa, K. Touafek, H. Ben Moussaand I. Tabet, “Modeling and detailed study of hybrid photovoltaic thermal (PV/T) solar collector”, vol. 135, pp. 169–176, Jun. 2016. https://doi.org/10.1016/j.solener.2016.05.048.

A. Kazemian, M. Hosseinzadeh, M. Sardarabadiand M. Passandideh-Fard, “Effect of glass cover and working fluid on the performance of photovoltaic thermal (PVT) system: An experimental study”, vol. 173, no. June, pp. 1002–1010, Jun. 2018. https://doi.org/10.1016/j.solener.2018.07.051.

L. A. Abdullah, S. Mishaand N. Tamaldin, “Theoretical study and indoor experimental validation of performance of the new photovoltaic thermal solar collector (PVT) based water system”, vol. 18, no. January, p. 100595, Jun. 2020. https://doi.org/10.1016/j.csite.2020.100595.

M. Javidan and A. Moghadam, “Effective cooling of a photovoltaic module using jet-impingement array and nanofluid coolant”, vol. 137, no. August, p. 106310, Jun. 2022. https://doi.org/10.1016/j.icheatmasstransfer.2022.106310.

M. Raju, R. Sarmaand A. Suryan, “Investigation of optimal water utilization for water spray cooled photovoltaic panel: A three-dimensional computational study”, vol. 51, no. December, p. 101975, Jun. 2022. https://doi.org/10.1016/j.seta.2022.101975.

S. Majeed, A. Abdul-Zahraand D. Mutasher, “Cooling of a PVT System Using an Underground Heat Exchanger: An Experimental Study”, vol. 8, no. 33, pp. 29926–29938, Jun. 2023. https://doi.org/10.1021/acsomega.2c07900.

T. Brahim and A. Jemni, “Parametric study of photovoltaic/thermal wickless heat pipe solar collector”, vol. 239, no. April, p. 114236, Apr. 2021. https://doi.org/10.1016/j.enconman.2021.114236.

A. Ahmed, O. Khalil, M. Mustafaand K. Ibrahim, “Performance augmentation of a PV / Trombe wall using Al 2 O 3 / Water nano- fluid : An experimental investigation”, vol. 157, pp. 515–529, Jun. 2020. https://doi.org/10.1016/j.renene.2020.05.052.

E. Skoplaki and J. Palyvos, “On the temperature dependence of photovoltaic module electrical performance : A review of efficiency/power correlations”, vol. 83, no. 5, pp. 614–624, Jun. 2009. https://doi.org/10.1016/j.solener.2008.10.008.

Downloads

Key Dates

Received

2023-12-04

Revised

2024-03-29

Accepted

2024-04-22

Published Online First

2024-07-01

Published

2024-07-01

How to Cite

Performance Assessments of Direct Contact Serpentine Tube Based Photovoltaic Thermal Module: An Experimental Comparison. (2024). Journal of Engineering and Sustainable Development, 28(4), 473-479. https://doi.org/10.31272/jeasd.28.4.6

Similar Articles

21-30 of 837

You may also start an advanced similarity search for this article.