RETRACTED: ALLOCATION OF HYBRID COMPOSITE MATERIALS IN FRICTION DISC CLUTCHES

Authors

  • Iman M. Naemah Mechanical Engineering Department, Diyala University, Baqubah City, Diyala, Iraq Author
  • Saad T. Faris Mechanical Engineering Department, Diyala University, Baqubah City, Diyala, Iraq Author
  • Khuder N. Abed Mechanical Engineering Department, Diyala University, Baqubah City, Diyala, Iraq Author https://orcid.org/0000-0002-1023-8130

DOI:

https://doi.org/10.31272/jeasd.27.3.5

Abstract

Retraction

This article has been retracted according to the decision made by members of the editorial board of the Journal of Engineering and Sustainable Development due to misconduct and infraction of publication ethics. After an inclusive review, specialist editors have found that the authors of this article have violated the following two points of publication ethics:

  1. Test results are fabricated;
  2. The findings have previously been published elsewhere without proper credit to previous sources (authors).

References

Biczó, R., & Kalácska, G. (2022). Effects of Automotive Test Parameters on Dry Friction Fiber-Reinforced Clutch Facing Surface Microgeometry and Wear—Part. Polymers. Vol. 14, Issue 9, pp. 1757. https://doi.org/10.3390/polym14091757.

Zhao, Z., Chen, J., Li, X., & Lei, D. (2019). Downshift decision and process optimal control of dual clutch transmission for hybrid electric vehicles under rapid braking condition. Mechanical Systems and Signal Processing. Vol.116, pp. 943-962. https://doi.org/ 10.3390/polym14091757.

Biczó, R., Kalácska, G., & Mankovits, T. (2020). Micromechanical model and thermal properties of dry-friction hybrid polymer composite clutch facings. Materials. Vol.13, Issue 20; pp. 4508. https://doi.org/10.3390/ma13204508.

Biczó, R., Kalácska, G., & Mankovits, T. (2021). Effects of Automotive Test Parameters on Dry Friction Fiber-Reinforced Clutch Facing Surface Microgeometry and Wear. Polymers. Vol. 13, Issue 22, pp. 3896. https://doi.org/10.3390/polym13223896.

Naemah, I. M., Kader, E. E., & Abed, K. N. (2018). Wear characteristics of Al-based composite material. Diyala Journal for Pure Sciences.‏ Vol. 14, Issue 1, pp. 129-140. https://doi.org/10.24237/djps.1401.350C.

Kadhim, E., Kader, E. E., & Zidan, L. (2020). Wear and Compressibility of Hybrid Composite Clutch. Diyala Journal of Engineering Sciences.‏ Vol. 13, Issue 6, pp.1116. https://doi.org/10.24237/djes.2020.13202.‏

Kumar, J. G. K., & Babu, R. V. (2020). Tribological and Mechanical behavior of reinforced polymer composite material for clutch facing in automobile application. In IOP Conference Series: Materials Science and Engineering- International Conference on Recent. Chennai, India. IOP Publishing. https://doi.org/10.1088/1757-899x/954/1/012047.

Bruce Ralphin Rose, J., & Vairamani, G. (2019). Experimental Investigation of Friction and Wear Properties of a Clutch Facing Made of Al-7075 with Basalt Fiber Metal Matrix Composite. Journal of Multiscale Modelling. Vol. 10, Issue 2, pp. 1850006. https://doi.org/10.1142/S1756973718500063.

Kadhim, E., Edan, E., & Yousuf, L. (2020). Comparison study of damping analysis of hybrid composite friction disc clutch- 2nd International Conference on materials engineering & science (IConMEAS2019). https://doi.org/10.1063/5.0000376.

Dhanasekaran, S., Sunilraj, S., Ramya, G., & Ravishankar, S. (2017). SiC and Al2O3 reinforced aluminum metal matrix composites for heavy vehicle clutch applications. Transactions of the Indian Institute of Metals. Vol. 69, Issue 3, pp. 699-703. https://doi.org/10.1007/s12666-015-0542-8.‏

Sundarapandian, G., & Arunachalam, K. (2020,). Investigating suitability of natural Fibre-based composite as an alternative to asbestos clutch facing material in dry friction clutch of automobiles-3rdInternational Conference on Advances in Mechanical Engineering, ICAME2020.Chennai, India.‏ https://doi.org/10.1088/1757-899X/912/5/052017.

Ma, Y., Liu, Y., Mao, C., Li, J., Yu, J., & Tong, J. (2018). Effects of Structured Fibre on Mechanical and Tribological Properties of Phenolic Composites for Application to Friction Brakes. Polymers and Polymer Composites. Vol. 26, Issue 4, pp. 315-324. https://doi.org/10.1177/096739111802600406.

Asiri, S. (2022). Numerical analysis of single dry clutch using functional graded aluminum matrix composite reinforced with silicon carbide. International Journal of Vehicle Noise and Vibration. Vol. 18, Issue 1/2, pp. 41. https://doi.org/10.1504/IJVNV.2022.10050578.

Gaikwad, P. B., Grime, S. R., Bagal, P. N., RAUT, N. N., & Kawale, R. (2017). A review on alfa composite material for automotive clutch plate application. Journal NX Vol. 3, Issue 4, pp. 22-26.

Ali, I. A., & Asiri, S. (2022). Thermal and mechanical analyses of dry clutch disk made of functionally graded aluminum matrix composite. Materials Research Express, Vol. 9, Issue 4, 046507.

Harper, C. A. (2002). Handbook of plastics, elastomers, and composites. 4th ed. 2013, McGraw-Hill Education.‏ ISBN: 0-07-138476-6.

El-Sonbati, A. (Ed.). (2012). Thermoplastic: Composite Materials. 1st ed. 2012, Croatia: BoD–Books on Demand. 158B.‏ ISBN: 978-953-51-0310-3.

Rajput, RK (2008). Engineering materials. 4th ed. 2008, India: S. Chand Publishing. 473B.‏ ISBN: 978-81-219-1960-9.

Harper, C. A. (2001). Handbook of materials for product design. 1st ed. 2001, New York: McGraw-Hill. 1000B.‏ ISBN: 0-07-135406-9.

Jassal, M., Agrawal, A. K., Gupta, D., & Panwar, K. (2020). Aramid fibers. Handbook of Fibrous Materials. 1st ed. 2020, New York: Wiley-VCH. 997B. ISBN: 3527342583.

Downloads

Key Dates

Published

2023-05-01 — Updated on 2023-05-30

Versions

Issue

Vol. 27 No. 3 (2023): Journal of Engineering and Sustainable Development

Section

Articles

License

Copyright (c) 2023 Khuder N. Abed, Iman M. Naemah, Saad T. Faris

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

How to Cite

M. Naemah, I. ., T. Faris, S. ., & N. Abed, K. (2023). RETRACTED: ALLOCATION OF HYBRID COMPOSITE MATERIALS IN FRICTION DISC CLUTCHES. Journal of Engineering and Sustainable Development, 27(3), 350-362. https://doi.org/10.31272/jeasd.27.3.5 (Original work published 2023)