EFFECT OF WELDING PROCESS PARAMETERS ON TENSILE OF LOW CARBON STEEL 283 G.C

المؤلفون

  • Hussain Hayyal Mechanical Engineering Department, College of Engineering, Mustansiriyah University, Baghdad, Iraq مؤلف
  • Nadhim M. Faleh Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq مؤلف

DOI:

https://doi.org/10.31272/jeasd.26.1.8

الكلمات المفتاحية:

SMAW، SAW، GTAW، Taguchi، ANOVA، S/N، minitab

الملخص

In this study, three welding methods are used. The purpose to investigation the effects of SMAW, SAW, and gas tungsten arc welding (GTAW) on the tensile stress of low carbon steel conforming to ASTM 283 c. 8mm thick plates are used as base material for butt welded joints. The tensile properties of the welded joints were evaluated and the results were compared by experts using the Taguchi method to design three levels of each parameter (current, voltage and displacement speed). From this research, it is found that compared to metal shielded arc welding and submerged arc welding, the pulling effect of the gas shielded welding joint of the tungsten electrode is the best. This is mainly due to the presence of The results of using analysis of variance (ANOVA) to estimate important parameters show that welding current and speed of the weld have a significant effect on tensile stress. The experimental results are in agreement with predicted results, and the maximum error is 3%.

التنزيلات

Key Dates

منشور

2022-01-01

إصدار

مجلد 26 عدد 1 (2022): Journal of Engineering and Sustainable Development

القسم

Articles

الرخصة

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.

The Journal of Engineering and Sustainable Development is an open-access journal that all contents are free of charge. Articles of this journal are licensed under the terms of the Creative Commons Attribution International Public License CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/legalcode) that licensees are unrestrictly allowed to search, download, share, distribute, print, or link to the full texts of the articles, crawl them for indexing and reproduce any medium of the articles provided that they give the author(s) proper credits (citation). The journal allows the author(s) to retain the copyright of their published article.
Creative Commons-Attribution (BY)

كيفية الاقتباس

EFFECT OF WELDING PROCESS PARAMETERS ON TENSILE OF LOW CARBON STEEL 283 G.C. (2022). مجلة الهندسة والتنمية المستدامة, 26(1), 79-86. https://doi.org/10.31272/jeasd.26.1.8

المؤلفات المشابهة

1-10 من 11

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.