CHARACTERIZATION OF SAGO PALM-CARBON FIBRE REINFORCED EPOXY HYBRID COMPOSITES
DOI:
https://doi.org/10.31272/jeasd.26.6.3Keywords:
Sago palm fiber, carbon fiber, hybrid composites, mechanical propertiesAbstract
Natural fibres are potential alternatives to synthetic fibres. Sago palm is a new type of natural fibre and has the potential same as other existing natural fibres. In this study, the mechanical properties of sago palm/carbon fibre reinforced with epoxy hybrids were studied. Impact tests were conducted to study the impact properties of sago palm-carbon fiber-reinforced epoxy hybrid composites. The hybrid composites contain woven sago palm fibre and carbon fibre reinforced with epoxy resin is produced by the vacuum compaction method. Each sample was prepared with different volume fractions such as 40%, 64% and 91% of composition sago palm fibre. After the preparation of composite material, mechanical properties tests were studied on the prepared sample. In addition, by using Scanning Electron Microscope Tests, the failure mode is investigated. It can be concluded that 40% of sago palm fiber contains to have the best impact behavior compared to the 64% and 91% of sago palm fiber loading because it’s high in impact resistance.
References
Faruk, O., Bledzki, A. K., Fink, H. P., and Sain, M. (2012). "Biocomposites reinforced with natural fibers: 2000–2010," Progress in Polymer Science 37(11), 1552-1596. https://doi.org/10.1016/j.progpolymsci.2012.04.003
Dawood Salman, S. (2022). Experimental Measurements of the Mechanical Behavior of the Composite Materials and Hybrid Materials Subject to Tensile Test. Journal of Engineering and Sustainable Development, 17(1), 162–170. Retrieved from https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1100
Mohammed H. Khalaf, Suhad D. Salman. (2021). APPARATUS AND METHOD FOR CALCULATING PENETRATION FORCE BY DROP WEIGHT IMPACT TECHNIQUE. Journal of Engineering and Sustainable Development, 2nd online Scientific conference for Graduate Engineering Students June 2021. https://doi.org/10.31272/jeasd.conf.2.2.2
Salman, S.D." Partial replacement of synthetic fibres by natural fibres in hybrid composites and its effect on monotonic properties" Journal of Industrial Textiles, 2021, 51(2), pp. 258–276. https://doi.org/10.1177/1528083719878843
Gyanaranjan M., Chaitanya P.B., (2009) “Characterization of Hybrid FRP Composites with Hygrothermal Exposure under Varied Ambient Conditions”. National Institute of Technology Rourkela pp. 20-21 Retriveed from http://ethesis.nitrkl.ac.in/175/1/GYANA
Haruna V.N., Abdulrahman A.S., Zubairu P.T., Isezuo L.O., Abdulrahman M.A., Onuoha D.C., (2014) “Prospects And Challenges Of Composites In A Developing Country”, ARPN Journal of Engineering and Applied Sciences, 9 (7), 1819-6608
Salman, S.D. "Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications" Defence Technology, 2020, 16(6), pp. 1098–1105. https://doi.org/10.1016/j.dt.2019.11.013
Salman, S.D."The influence of kenaf contents and stacking sequence on drop-weight impact properties of hybrid laminated composites reinforced polyvinyl butyral composites" 2020 Journal of Industrial Textiles. https://doi.org/10.1177/1528083720937388
Introduction of Fibre-Reinforced Polymers − Polymers and Composites: Concepts, Properties and Processes (2013) Retrieved from http://cdn.intechopen.com/pdfs-wm/41941.
Sgriccia, N., Hawley, M. C., and Misra, M. (2008). "Characterization of natural fiber surfaces and natural fiber composites," Composites Part A: Applied Science and Manufacturing 39(10), 1632-1637.
https://doi.org/10.1016/j.compositesa.2008.07.007
Sutrisno, W.; Rahayu, M.; Adhika, D.R. Thermal Properties of Sago Fiber-Epoxy Composite. Fibers 2020, 8, 4.
https://doi.org/10.3390/fib8010004
Supu, I.; Jaya, I. Synthesis and Compression Strength Properties of Composite Based on Sago Pulp FiberWaste. IOP Conf. Earth Environ. Sci. 2018,187, 1–6.
Mardin, H. & Wardana, I. & Pratikto, & Suprapto, Wahyono & Kamil, Kusno. (2016). Effect of Sugar Palm Fiber Surface on Interfacial Bonding with Natural Sago Matrix. Advances in Materials Science and Engineering. 2016. 1-5.
https://doi.org/10.1155/2016/9240416.
El-Shekeil, Y. A., Sapuan, S. M., Abdan, K., and Zainudin, E. S. (2012). "Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites," Materials and Design 40, 299-303. https://doi.org/10.1016/j.matdes.2012.04.003
El-Shekeil, Y. A., Sapuan, S. M., and Algrafi, M. W. (2014). "Effect of fiber loading on mechanical and morphological properties of cocoa pod husk fibers reinforced thermoplastic polyurethane composites," Materials and Design 64, 330-333. https://doi.org/10.1016/j.matdes.2014.07.034
Saba, N., Jawaid, M., Hakeem, K. R., Paridah, M. T., Khalina, A., and Alothman, O. Y. (2015( Potential of bioenergy production from industrial kenaf (Hibiscus cannabinus L.) based on Malaysian perspective," Renewable and Sustainable Energy Reviews 42, 446-459. https://doi.org/10.1016/j.rser.2014.10.029
Sapuan, S. M., Leenie, A., Harimi, M., and Beng, Y. K. (2006). "Mechanical properties of woven banana fibre reinforced epoxy composites," Materials and Design 27(8), 689-693. https://doi.org/10.1016/j.matdes.2004.12.016
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Safinaz Binti Saad, Suhad D. Salman, Zulkiflle Leman, Munir Faraj Alkbir
This work is licensed under a Creative Commons Attribution 4.0 International License.
